我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone USB duplicator with LCD screen and fifteen slots

Systor

Systor SYS-USBD-15 USB Duplicator 15 Target 33MB/s

SKU CH-FV7B-N0S3M

Standalone USB flash drive duplicator copies up to 15 targets simultaneously at 33 MB/s with asynchronous operation and bit-for-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 15
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 15

顯示另外 7 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Standalone operation copies drives without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 33 MB/s transfer rate duplicates up to 2 GB per minute
  • 256 MB buffer memory sustains high-speed data flow
  • Bit-for-bit hardware compare confirms every copy is accurate

Standalone 15-target USB duplicator

This unit copies up to 15 flash drives at once without a host computer. It supports USB 1.1, 2.0 and 3.0 media in synchronous or asynchronous modes. A 256 MB buffer and multi-core processor manage each channel independently. The LCD screen and four-button control handle all operations.

USB 3.0 interface caps throughput at 33 MB/s

The duplicator’s maximum sustained transfer rate is 33 MB/s, matching the practical ceiling of the USB 3.0 targets it serves. Older USB 2.0 or 1.1 drives will run at their own lower limits. No internal bus or protocol can exceed this figure, so total session time scales with the slowest attached device.

15 simultaneous targets with bit-level verification

The 15 ports allow high-volume duplication of FAT16, FAT32, NTFS and Linux EXT2/3/4 volumes. Whole-media mode copies every sector regardless of format. Quick-erase and DoD-compliant full-erase modes sanitise drives before reuse. Throughput per port drops when all 15 channels run together, so very large images take proportionally longer.

商品特色

  • Standalone operation copies drives without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 33 MB/s transfer rate duplicates up to 2 GB per minute
  • 256 MB buffer memory sustains high-speed data flow
  • Bit-for-bit hardware compare confirms every copy is accurate

商品規格

TypeUSB Flash Drive Duplicator
Target1 to 15
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 250 W

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I pick the 15-target model or a smaller one?

The 15-target model lets you copy to fifteen USB drives at once, saving time for larger batches.

What does the 33MB/s rate mean when I am actually copying drives?

It equals roughly 2 GB per minute, so a full 16 GB drive finishes in about eight minutes under ideal conditions.

Which USB standards does the duplicator support and what speed ceiling do they impose?

It handles USB 1.1, 2.0 and 3.0 devices; the 33 MB/s ceiling is set by the internal engine, not the USB version.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。