Team Group NV5000 2TB M.2 2280 internal SSD TM8FGM002T0C101
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Team Group
A 1TB PCIe 4.0 x4 NVMe SSD with graphene heat-sink delivering up to 4500 MBps read and 1900 MBps write
Capacity 1TB
The NV5000 TM8FGM001T0C101 is a consumer-class internal SSD with 1TB capacity and an M.2 2280 form factor. It connects through a PCIe 4.0 x4 interface using the NVMe protocol. The drive uses a DRAM-less design with host memory buffer support. Sequential reads reach up to 4500 MBps and writes up to 1900 MBps.
A patented graphene cooling label sits on the controller to dissipate heat without adding bulk. The drive measures 3.70mm in height, fitting standard M.2 slots in laptops and desktops. It is rated for operation from 0°C to 70°C and storage from -40°C to 85°C. Shock resistance is specified at 1500G for 0.5ms and vibration resistance at 80Hz to 2000Hz at 20G.
The drive supports S.M.A.R.T. health monitoring so you can track wear and temperature in software. Packaging uses recycled materials to reduce environmental impact. Endurance is rated at 320TBW with a mean time between failures of 2000000 hours. The graphene label design is protected by Taiwan utility patent M628748.
| Brand | Team Group |
|---|---|
| Series | NV5000 |
| Model | TM8FGM001T0C101 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCIe 4.0 x4 with NVMe |
| Protocol | NVMe |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 4500 MBps |
| Max Sequential Write | Up to 1900 MBps |
| Terabytes Written (TBW) | 320TBW |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G/0.5ms |
| Max Vibration Resistance | 80Hz~2,000Hz/20G |
| Height | 3.70mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7g |
| Shipping weight | 0.05 kg |
| Package size | 124 × 94 × 1 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The PCIe 4.0 x4 interface delivers up to 4500 MBps sequential read and up to 1900 MBps sequential write under typical workloads.
The drive measures 3.70 mm tall including the graphene heatsink label, so the motherboard M.2 slot must accommodate at least that height without pressing on the label.
Insert the M.2 2280 card at an angle into the keyed slot, press it flat, and secure it with the single motherboard screw; the step often missed is removing any pre-installed motherboard heatsink that would collide with the drive's own graphene label.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?