We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 140mm ARGB case fans with luminous frames and nine LCP blades each

Thermaltake

Thermaltake CL-F213-PL14SW-A 140mm ARGB case fan 3-pack white

SKU CH-SWYS-W48ZZ MPN CL-F213-PL14SW-A

Three 140 mm white ARGB fans deliver 94.43 CFM airflow and 3.04 mm-H2O static pressure at up to 2000 RPM with hydraulic bearings and 5 V motherboard sync

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • MagForce 2.0 pogo pins double the contact area for stable connections
  • Luminous side frames add diffused ARGB glow beyond front and rear lighting
  • 04 mm-H₂O static pressure and 94.43 CFM suit both air and water cooling
  • 5 V 3-pin ARGB header syncs lighting through motherboard software
  • Nine LCP blades cut vibration at up to 2000 RPM while keeping 35.3 dB-A noise

Three-fan kit for 140mm mounts

This three-pack supplies three 140mm case fans with white frames and addressable RGB lighting. Each unit uses a hydraulic bearing and runs at PWM speeds between 500 and 2000 RPM. The kit targets builders who want coordinated lighting and airflow across multiple intake or exhaust positions.

MagForce 2.0 mounting and 5V ARGB sync

MagForce 2.0 enlarges the pogo-pin contact pads to twice their previous size, making the magnetic frame attachment more secure during installation. A 5V three-pin ARGB header on each fan connects to a compatible motherboard so lighting can be managed through the board vendor's own software.

Hydraulic bearing and dual 4-pin plus 3-pin

The hydraulic bearing is rated for quiet operation at 35.3 dB-A per fan while delivering 94.43 CFM of airflow and 3.04 mm-H2O static pressure. Nine liquid-crystal-polymer blades reduce vibration at higher speeds. Each fan carries both a 2510 four-pin PWM power connector and the separate three-pin ARGB lead for simultaneous speed control and lighting.

Highlights

  • MagForce 2.0 pogo pins double the contact area for stable connections
  • Luminous side frames add diffused ARGB glow beyond front and rear lighting
  • 04 mm-H₂O static pressure and 94.43 CFM suit both air and water cooling
  • 5 V 3-pin ARGB header syncs lighting through motherboard software
  • Nine LCP blades cut vibration at up to 2000 RPM while keeping 35.3 dB-A noise

Specifications

BrandThermaltake
ModelCL-F213-PL14SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow94.43 CFM (one fan)
Noise Level35.3 dB-A (one fan)
Power Connector2510 – 4 Pin
5V ARGB header-3 Pin
ColorWhite
LEDARGB
Shipping weight1.02 kg
Package size168 × 155 × 89 mm

Questions about this item

How often will the hydraulic bearings in these 140 mm fans need replacement?

Hydraulic bearings are sealed for the life of the fan; no scheduled bearing replacement is required under normal use.

What limits continuous operation at the 2000 RPM top speed?

At 2000 RPM each fan produces 35.3 dB-A and 3.04 mm-H₂O static pressure; noise and pressure curves are the practical limits during sustained loads.

How much noise and heat do three white ARGB fans add when running all day?

Three fans at full speed reach 35.3 dB-A each with 94.43 CFM airflow; the 5 V ARGB LEDs add negligible heat while the hydraulic bearings keep vibration low.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.