Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Three white 140mm ARGB case fans with luminous frames and nine LCP blades each

Thermaltake

Thermaltake CL-F213-PL14SW-A 140mm ARGB case fan 3-pack white

SKU CH-SWYS-W48ZZ MPN CL-F213-PL14SW-A

Three 140 mm white ARGB fans deliver 94.43 CFM airflow and 3.04 mm-H2O static pressure at up to 2000 RPM with hydraulic bearings and 5 V motherboard sync

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • MagForce 2.0 pogo pins double the contact area for stable connections
  • Luminous side frames add diffused ARGB glow beyond front and rear lighting
  • 04 mm-H₂O static pressure and 94.43 CFM suit both air and water cooling
  • 5 V 3-pin ARGB header syncs lighting through motherboard software
  • Nine LCP blades cut vibration at up to 2000 RPM while keeping 35.3 dB-A noise

Three-fan kit for 140mm mounts

This three-pack supplies three 140mm case fans with white frames and addressable RGB lighting. Each unit uses a hydraulic bearing and runs at PWM speeds between 500 and 2000 RPM. The kit targets builders who want coordinated lighting and airflow across multiple intake or exhaust positions.

MagForce 2.0 mounting and 5V ARGB sync

MagForce 2.0 enlarges the pogo-pin contact pads to twice their previous size, making the magnetic frame attachment more secure during installation. A 5V three-pin ARGB header on each fan connects to a compatible motherboard so lighting can be managed through the board vendor's own software.

Hydraulic bearing and dual 4-pin plus 3-pin

The hydraulic bearing is rated for quiet operation at 35.3 dB-A per fan while delivering 94.43 CFM of airflow and 3.04 mm-H2O static pressure. Nine liquid-crystal-polymer blades reduce vibration at higher speeds. Each fan carries both a 2510 four-pin PWM power connector and the separate three-pin ARGB lead for simultaneous speed control and lighting.

Pontos fortes

  • MagForce 2.0 pogo pins double the contact area for stable connections
  • Luminous side frames add diffused ARGB glow beyond front and rear lighting
  • 04 mm-H₂O static pressure and 94.43 CFM suit both air and water cooling
  • 5 V 3-pin ARGB header syncs lighting through motherboard software
  • Nine LCP blades cut vibration at up to 2000 RPM while keeping 35.3 dB-A noise

Especificações

BrandThermaltake
ModelCL-F213-PL14SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow94.43 CFM (one fan)
Noise Level35.3 dB-A (one fan)
Power Connector2510 – 4 Pin
5V ARGB header-3 Pin
ColorWhite
LEDARGB
Peso de envio1.02 kg
Dimensões da embalagem168 × 155 × 89 mm

Perguntas sobre este artigo

How often will the hydraulic bearings in these 140 mm fans need replacement?

Hydraulic bearings are sealed for the life of the fan; no scheduled bearing replacement is required under normal use.

What limits continuous operation at the 2000 RPM top speed?

At 2000 RPM each fan produces 35.3 dB-A and 3.04 mm-H₂O static pressure; noise and pressure curves are the practical limits during sustained loads.

How much noise and heat do three white ARGB fans add when running all day?

Three fans at full speed reach 35.3 dB-A each with 94.43 CFM airflow; the 5 V ARGB LEDs add negligible heat while the hydraulic bearings keep vibration low.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.