We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Thermaltake

Thermaltake Toughpower GF1 850W Power Supply PS-TPD-0850FNFAGU-1

SKU CH-XS2N-PZJ6A MPN PS-TPD-0850FNFAGU-1

An 850 W fully modular ATX power supply with 80 PLUS Gold efficiency, a 140 mm hydraulic bearing fan, Japanese capacitors and 12 SATA connectors

  • TypeATX12V
  • Maximum Power850 W
  • Fans140mm hydraulic bearing fan
  • PFCActive
  • Main Connector20+4Pin
  • +12V RailsSingle

Options ATX 80+ Gold (850W) Black

  • 80 PLUS Gold efficiency saves energy with up to 90% conversion
  • Fully modular design reduces cable clutter for cleaner builds
  • 140mm hydraulic-bearing fan stays silent until load exceeds 30%
  • Japanese capacitors rated at 105°C ensure long-term stability
  • Single +12V rail with 6 PCIe connectors powers multi-GPU setups

850W ATX power supply for high-end builds

The Thermaltake Toughpower GF1 850W is a fully modular ATX12V unit rated at 850 W and certified 80 PLUS Gold. It targets enthusiasts who need stable, efficient power for multi-GPU configurations and high ambient temperatures up to 50°C. A single +12 V rail and ripple below 30 mV keep performance-critical components running reliably. Japanese capacitors rated at 105°C back the 10-year warranty.

Full modularity and zero-cable platform

Every cable detaches so only the required connectors remain in the case, reducing clutter and improving airflow. The Zero-Cable Platform solders daughterboards directly to the main PCB via a copper plate, enhancing heat dissipation and output quality. Six 6+2-pin PCIe connectors and twelve SATA power connectors support SLI and CrossFire multi-GPU setups. A 140 mm hydraulic-bearing fan spins only after 30 % load, and a rear switch forces constant rotation if preferred.

Upgrade from lower-wattage or group-regulated units

Builders moving from 650 W or non-modular designs gain the headroom for dual high-end graphics cards and the cleaner cable routing of full modularity. The Gold-rated efficiency reaches 90 % at typical loads, cutting waste heat versus Bronze units. Intel C6/C7 state readiness ensures compatibility with modern low-power idle modes. The 160 mm depth fits standard ATX cases, while 16 AWG CPU and PCIe cables handle higher current without voltage drop.

Highlights

  • 80 PLUS Gold efficiency saves energy with up to 90% conversion
  • Fully modular design reduces cable clutter for cleaner builds
  • 140mm hydraulic-bearing fan stays silent until load exceeds 30%
  • Japanese capacitors rated at 105°C ensure long-term stability
  • Single +12V rail with 6 PCIe connectors powers multi-GPU setups

Specifications

BrandThermaltake
SeriesToughpower GF1 850W - TT Premium Edition
ModelPS-TPD-0850FNFAGU-1
TypeATX12V
Maximum Power850 W
Fans140mm hydraulic bearing fan
PFCActive
Main Connector20+4Pin
+12V RailsSingle
PCI-Express Connector6 x 6+2-Pin
SATA Power Connector12
SLISLI Ready
CrossFireCrossFire Ready
Max PSU Length160 mm
ModularFull Modular
Power Good Signal100-500ms
Hold-up Time> 16msec at 100% of full load
Energy-Efficient80 PLUS GOLD Certified
PSU Noise LevelCybenetics A-
Over Voltage ProtectionYes
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current12A
Output+3.3V@22A, +5V@22A, [email protected] , [email protected] , +5VSB@3A
MTBF>120,000 Hours
ApprovalsCE / cTUVus / TÜV SÜD / FCC / BSMI / EAC
Connectors1 x 24-pin Main Power
2 x 4+4-pin ATX 12V
6 x PCI-E (6+2 pin)
12 x SATA
4 x Peripheral
1 x Floppy
FeaturesToughpower GF1 850W - TT Premium Edition
Zero Cable Platform
Ultra Quiet 140mm Hydraulic Bearing Fan
<30mV Low Ripple Noise
Extremely Strict Voltage Regulation <+/-2%
Fully Modular Low-Profile Flat Cable
Premium Japanese 105°C/221°F Capacitors
High Amperage Single +12V Rail
80 PLUS Gold Certified and Intel C6/C7 States Ready
Dimensions3.39" x 5.91" x 6.30"
Shipping weight3.31 kg
Package size325 × 231 × 160 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 160 mm long unit fit in a standard mid-tower case?

Most mid-tower cases accept power supplies up to 160 mm, so it fits without issue.

Are the cables pre-attached or can I use only the ones I need?

It is fully modular, so you connect only the cables your build requires.

Does it include enough PCIe connectors for a dual graphics card setup?

Yes, it provides six 6+2-pin PCIe connectors, supporting SLI and CrossFire configurations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.