We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Timetec

Timetec 16GB (4x4GB) DDR3 1333 CL9 1.5V 204-Pin SO-DIMM Apple iMac Mid 2010/2011

SKU CH-95YV-D631N

16 GB DDR3 SO-DIMM kit (four 4 GB modules) at 1333 MHz CL9 1.5 V for Mid 2010 and Mid 2011 iMac models

  • Capacity16GB (4 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB kit expands multitasking headroom
  • DDR3 1333 MHz CL9 matches original spec
  • 5 V unbuffered non-ECC modules run stable
  • Four 4 GB SO-DIMMs fill all iMac slots
  • Compatible with 21.5" and 27" Mid 2010 and 2011 iMacs

Timetec 16GB DDR3 SO-DIMM Kit

This kit provides four 4GB unbuffered non-ECC modules that run at DDR3 1333 with CL9 latency and 1.5V. It is built for Apple iMac models from Mid 2010 and Mid 2011 that accept 204-pin SO-DIMM memory.

DDR3 1333 speed ceiling

The memory operates at the 1333MHz data rate defined by the PC3-10600 standard. Systems that only support slower DDR3 grades will run these modules at the lower speed, while platforms needing faster DDR3 cannot exceed this frequency.

Four-slot 16GB capacity

Populating all four SO-DIMM slots delivers 16GB total, which suits multitasking and typical productivity workloads on the supported iMacs. Machines limited to two slots cannot use the full kit, and applications demanding more than 16GB will require a different platform.

Highlights

  • 16 GB kit expands multitasking headroom
  • DDR3 1333 MHz CL9 matches original spec
  • 5 V unbuffered non-ECC modules run stable
  • Four 4 GB SO-DIMMs fill all iMac slots
  • Compatible with 21.5" and 27" Mid 2010 and 2011 iMacs

Specifications

BrandTimetec
ModelMM-G4GD313S7C
Capacity16GB (4 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseFor Apple System

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 4×4 GB kit or a different capacity for my iMac?

This 16 GB kit contains four 4 GB modules, filling all four slots on the Mid 2010 27 inch and Mid 2011 21.5/27 inch iMacs for the maximum supported memory.

What does the 1333 MHz rating mean once the modules are installed?

The memory runs at 1333 MHz (PC3-10600) with CL9 latency at 1.5 V, delivering the standard DDR3 bandwidth those iMac models expect.

Does the 204-pin SO-DIMM interface limit the speed in practice?

The 204-pin DDR3 SO-DIMM form factor carries the 1333 MHz signal natively, so the interface does not impose any lower cap on these modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.