Timetec MR-H8GD313U7C 16GB (2x8GB) DDR3/DDR3L 1333MHz PC3-10600 CL9 240-pin UDIMM desktop RAM
- 16GB (2 x 8GB)
- DDR3 1333 (PC3 1060…
Timetec
16 GB DDR3 SO-DIMM kit (four 4 GB modules) at 1333 MHz CL9 1.5 V for Mid 2010 and Mid 2011 iMac models
Capacity 16GB (4 x 4GB)
This kit provides four 4GB unbuffered non-ECC modules that run at DDR3 1333 with CL9 latency and 1.5V. It is built for Apple iMac models from Mid 2010 and Mid 2011 that accept 204-pin SO-DIMM memory.
The memory operates at the 1333MHz data rate defined by the PC3-10600 standard. Systems that only support slower DDR3 grades will run these modules at the lower speed, while platforms needing faster DDR3 cannot exceed this frequency.
Populating all four SO-DIMM slots delivers 16GB total, which suits multitasking and typical productivity workloads on the supported iMacs. Machines limited to two slots cannot use the full kit, and applications demanding more than 16GB will require a different platform.
| Brand | Timetec |
|---|---|
| Model | MM-G4GD313S7C |
| Capacity | 16GB (4 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | For Apple System |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
This 16 GB kit contains four 4 GB modules, filling all four slots on the Mid 2010 27 inch and Mid 2011 21.5/27 inch iMacs for the maximum supported memory.
The memory runs at 1333 MHz (PC3-10600) with CL9 latency at 1.5 V, delivering the standard DDR3 bandwidth those iMac models expect.
The 204-pin DDR3 SO-DIMM form factor carries the 1333 MHz signal natively, so the interface does not impose any lower cap on these modules.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?