Timetec Pinnacle Konduit RGB 16GB (2x8GB) DDR4 3200MHz White
- 16GB (2 x 8GB)
- DDR4 3200 (PC4 2560…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Timetec
A 32 GB DDR4 2400 CL17 SODIMM kit for 2017 iMac 18,1, 18,2 and 18,3 models
Capacity 32GB (2 x 16GB)
This Timetec kit supplies 32GB of DDR4 2400 memory in two 16GB SO-DIMM modules built to the PC4-19200 standard. It matches the 260-pin, 1.20V, CL17 unbuffered non-ECC specification required by iMac models 18,1, 18,2 and 18,3. The modules are designed for Apple's 21.5-inch and 27-inch 2017 iMacs including Retina 4K, Retina 5K and non-Retina configurations.
Each module runs at 1.20V, the standard DDR4 voltage, so power draw and heat output remain low during typical workloads. With no ECC or registered circuitry the electrical load is minimal and the sticks produce no audible noise. Normal use such as application loading, multitasking and media editing stays within the thermal envelope of the iMac's existing cooling system.
The manufacturer states that every module is tested at component level for voltage tolerance, temperature resistance, signal integrity and software compatibility. This validation aims to reduce the chance of boot failures, kernel panics or data corruption after installation. No extra software, heat spreaders or RGB lighting are included; the benefit is confined to verified Mac compatibility and reliable operation at the rated 2400MHz CL17 speed.
| Brand | Timetec |
|---|---|
| Model | MR-H16D424S7E |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Remove the power cord, open the memory door with a screwdriver, eject the old modules by pulling the side levers, insert both 16GB sticks until they click, then close the door before reconnecting power — many forget to reseat the door latch fully.
No routine maintenance is required; the unbuffered non-ECC DDR4 modules have no moving parts. Replacement is only needed if a module fails, which is rare at the rated 1.20V and CL17 operation.
The CAS latency of 17 and 2400MHz data rate set the throughput ceiling; sustained loads hit the fixed timing budget before thermal limits on these 1.2V SO-DIMMs.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?