Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030554BTC
In stock
Toshiba
Toshiba MK1002TSKB 1TB 7200 RPM 64MB Cache SATA 3.0Gb/s 3.5" internal hard drive
3.5-inch SATA desktop drive with 1 TB capacity, 7200 RPM speed and 64 MB cache
- InterfaceSATA 3.0Gb/s
- Capacity1TB
- NAND Flash Memory TypeEnterprise
- RPM7200 RPM
- Cache64MB
- Average Seek Time9.5ms
- 1TB capacity for desktop storage
- 7200 RPM speed with 64MB cache for responsive performance
- SATA 3.0Gb/s interface for broad compatibility
- DoD 5220.22 M compliant erasure for data security
- 5-inch form factor fits standard drive bays
Desktop enterprise hard drive
The Toshiba MK1002TSKB is a 3.5 inch internal hard drive built for desktop systems that need 1 TB of storage on a SATA 3.0Gb/s interface. It spins at 7200 RPM with a 64 MB cache and carries an enterprise-grade NAND flash memory type. The drive has been erased to DoD 5220.22 M compliance and tested for working condition.
Capacity and headroom
One terabyte provides room for operating systems, applications and large media libraries on a single volume. The 7200 RPM spindle and 64 MB cache keep sequential throughput steady for everyday workloads. Random access latency of 9.5 ms seek and 4.17 ms rotational delay limits performance on heavily threaded or transaction-heavy tasks.
Thermals noise and power
Mechanical operation at 7200 RPM produces audible seek noise and measurable vibration in quiet chassis. The SATA 3.0Gb/s interface draws modest power during sustained reads and writes. Heat output is typical for a 3.5 inch enterprise drive and requires standard case airflow to remain within safe operating temperatures.
Highlights
- 1TB capacity for desktop storage
- 7200 RPM speed with 64MB cache for responsive performance
- SATA 3.0Gb/s interface for broad compatibility
- DoD 5220.22 M compliant erasure for data security
- 5-inch form factor fits standard drive bays
Specifications
| Brand | TOSHIBA |
|---|---|
| Model | MK1002TSKB |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| NAND Flash Memory Type | Enterprise |
| RPM | 7200 RPM |
| Cache | 64MB |
| Average Seek Time | 9.5ms |
| Average Latency | 4.17ms |
| Features | Erased (DoD 5220.22 M Compliant) and tested good (Not formatted, partitioned, or allocated). Sold as used and in working condition. There may be drives that have up to 25 bad sectors. There may be writing or markings on the drive or the drive may vary slightly (color and/or label may differ) from picture but the model numbers will be the same. |
| Form Factor | 3.5" |
| Shipping weight | 0.68 kg |
| Package size | 147 × 102 × 25 mm |
Questions about this item
Will the SATA 3.0Gb/s interface on this MK1002TSKB work with my older motherboard that only supports SATA 1.5Gb/s?
Yes, the SATA 3.0Gb/s interface is backward compatible with SATA 1.5Gb/s ports, so the drive will function at the slower speed on your older motherboard.
How can I verify the 7200 RPM spindle speed and 9.5ms average seek time are performing correctly after installation?
Run a benchmark tool such as CrystalDiskMark or HD Tune; the sequential throughput and access-time results should align with a 7200 RPM drive with 9.5ms seek time.
Does the retail box include a SATA data cable and mounting screws, or do I need to buy them separately?
The drive is sold as OEM or retail packing may vary; typically only the bare drive is included, so you should source a SATA data cable and 3.5" mounting screws separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
