We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal DIN-rail power supply, matte grey finish, terminal blocks on front, model 25104

Transition Networks

Transition Networks 25104 power supply DIN rail 240W 48V AC 88-132/DC 124-370V

SKU CH-0ZY0-AVX6F

DIN-rail power supply delivers 240 W at 48 V from AC 88-132 V or DC 124-370 V input

  • DIN rail mounting fits standard industrial cabinets
  • 240 W output powers multiple 48 V devices
  • Wide AC 88-132 V and DC 124-370 V input tolerates unstable supplies
  • Compact 2.5 in × 4.5 in × 4.9 in footprint saves panel space
  • Light 2.3 lb unit simplifies installation and reduces shipping weight

DIN-rail 240 W power adapter

The Transition Networks 25104 is a DIN-rail mountable power adapter that delivers 48 V DC at up to 240 W. It suits industrial control cabinets and network equipment racks where a compact, rail-mounted supply is required. The unit weighs 2.3 lbs and measures 2.5 in wide by 4.5 in deep by 4.9 in high. It is supplied new with a limited lifetime warranty from the manufacturer.

Input voltage window and practical limits

The adapter accepts AC input from 88 V to 132 V and DC input from 124 V to 370 V. Operation outside these ranges is not supported, so the installer must verify that the site supply stays within the stated window. No other input standards or frequency ratings are specified in the data. The wide DC range allows use with battery-backed bus voltages common in telecom and utility environments.

240 W capacity and headroom

At 48 V the unit provides a maximum of 240 W continuous power. Loads that draw less than this rating will run with headroom; sustained loads above 240 W will exceed the adapter's capacity. The fixed 48 V output means the supply cannot be re-purposed for 12 V or 24 V systems without additional conversion. Buyers needing higher wattage or a different output voltage must select another model.

Highlights

  • DIN rail mounting fits standard industrial cabinets
  • 240 W output powers multiple 48 V devices
  • Wide AC 88-132 V and DC 124-370 V input tolerates unstable supplies
  • Compact 2.5 in × 4.5 in × 4.9 in footprint saves panel space
  • Light 2.3 lb unit simplifies installation and reduces shipping weight

Specifications

No published specifications for this item yet.

Questions about this item

Which power capacity suits my 48 V load?

The unit delivers 240 W at 48 V, so choose it when your total draw is at or below that figure.

What does the 240 W rating mean once installed?

It means the adapter can supply up to 240 W continuously to a 48 V system from either AC 88-132 V or DC 124-370 V input.

What input standard does the 25104 accept and what does it cap?

It accepts AC 88-132 V or DC 124-370 V and caps the usable output at 240 W / 48 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.