We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U rackmount UPS with front status LEDs and six rear outlets

Tripp Lite

Tripp Lite SMART1000RM1UN 1000VA 800W 1U Rack UPS

SKU CH-03X7-2N3MG MPN SMART1000RM1UN

1U rack UPS delivers 1000VA sine-wave power with automatic voltage correction from 83V to 147V, six outlets and a pre-installed network card

  • Input Voltage Range120V AC
  • Input ConnectionNEMA 5-15P
  • VA Rating1000 VA
  • Watts800 Watts
  • Output Voltage120V
  • Outlets6

VA 1000 VA w/ WEBCARDLX

Struck-through versions exist but are not stocked here.

  • Sine-wave output protects sensitive equipment
  • Corrects voltage from 83V to 147V without battery drain
  • Pre-installed WEBCARDLX enables remote network management
  • Two outlets switchable via network for load control
  • 14 minutes runtime at 400W half load

1U Rackmount UPS with Sine Wave Output

The Tripp Lite SMART1000RM1UN is a line-interactive UPS that delivers 1000 VA and 800 W of sine wave power in a 1U rackmount chassis. It corrects brownouts and overvoltages from 83V to 147V without using battery power. Six NEMA 5-15R outlets provide protected connections for servers and network gear.

Verify 120V Input and NEMA 5-15P Compatibility

Confirm that your facility supplies 120V AC and that the NEMA 5-15P input plug matches your power source or PDU. The unit requires a standard 15-amp circuit and fits a 1U rack space measuring 1.75 inches in height. Ensure the 16.75-inch depth clears your rack rails and cable management.

Replaces Non-Sine-Wave or Tower Units

This model replaces standby or simulated-sine-wave UPS units when connected equipment requires pure sine wave output. It also upgrades tower-form-factor backups to a 1U rackmount design with a pre-installed WEBCARDLX network interface for remote management. The jump is worth it when you need network-managed, switchable outlets and automatic voltage regulation in a compact rack footprint.

Highlights

  • Sine-wave output protects sensitive equipment
  • Corrects voltage from 83V to 147V without battery drain
  • Pre-installed WEBCARDLX enables remote network management
  • Two outlets switchable via network for load control
  • 14 minutes runtime at 400W half load

Specifications

BrandTRIPP LITE
ModelSMART1000RM1UN
Input Voltage Range120V AC
Input ConnectionNEMA 5-15P
VA Rating1000 VA
Watts800 Watts
Output Voltage120V
Outlets6
Outlet Type5-15R
Battery TypeValve Regulated Lead Acid (VRLA)
Battery Run TimeFull Load Runtime (minute): 4 minutes (800 Watts)
Half Load Runtime (minute): 14 minutes (400 Watts)
Battery ReplaceableRBC69-1U
AlarmsAudible alarm indicates power-failure, overload and low-battery conditions
Interface PortDB9 Serial; EPO (emergency power off); Pre-installed network card; USB
Management SoftwarePowerAlert Software
ApprovalsTested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
Rackmountable1U
Surge Energy Rating450 Joules
Features1000 VA / 800 Watts line interactive 1U rackmount UPS, Sine Wave
120V output, Corrects brownouts and overvoltages from 83V to 147V
0.8 Power Factor, Front panel status LEDs
Mounting brackets support 2 and 4 post installation
99% line-mode efficiency, 2 switched load banks
USB, RS232, EPO and PRE-INSTALLED SNMPWEBCARD
120V NEMA 5-15P input, 6 x NEMA 5-15R outlets
Dimensions1.75" x 17.50" x 16.75"
Weight32.00 lbs.
Shipping weight15.88 kg
Package size584 × 546 × 127 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box and do I need to buy any cables or batteries separately?

The UPS ships with the WEBCARDLX network card already installed, a USB cable, a DB9 serial cable, mounting brackets for two- and four-post racks and the internal VRLA battery. No extra battery or cables are required for basic operation.

Should I choose a different VA or wattage model for my load?

This unit delivers 1000 VA and 800 watts at a 0.8 power factor; select it when your connected equipment draws up to 800 watts. A lower-wattage model would not support that load, while a higher-wattage model adds capacity you do not need.

What does the 4-minute runtime at full load mean for my servers?

At the full 800-watt load the battery lasts 4 minutes, enough for an orderly shutdown. At a typical half load of 400 watts the runtime extends to 14 minutes, giving more time for automated scripts to complete.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.