NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
TROPRO
Adds two USB 3.1 Gen 2 Type-C ports at 10 Gbps via a PCIe x4 slot with ASMedia ASM3142 chipset and SATA 15-pin power
Type PCI Express to USB Card
Struck-through versions exist but are not stocked here.
Model 2x Type C – Ext
Struck-through versions exist but are not stocked here.
Option PCI-Express to Type C
Struck-through versions exist but are not stocked here.
This PCI Express 4x expansion card adds two USB 3.1 Gen 2 Type-C ports to a desktop system. It fits PCIe 4x, 8x or 16x slots and is compatible with Windows 7, 8, 10, Linux and macOS 10.14. The ASMedia ASM3142 chipset provides up to 10 Gbps bandwidth per port for fast data transfer with external storage or peripherals.
The card draws power from the PCIe slot and includes a SATA 15-pin power connector for additional current when needed. Built-in over-current and short-circuit protection safeguards each port during everyday operation. Bus-powered mode handles most peripherals without external power, keeping heat output low in typical desktop workloads.
Each Type-C port can deliver 5 V at up to 2 A continuously, supporting device charging alongside data transfers. The PCIe 2.0 x4 host interface maintains full-duplex 10 Gbps throughput during prolonged file copies. Backward compatibility with USB 3.0 and 2.0 ensures stable connectivity even when older devices share the bus.
| Brand | TROPRO |
|---|---|
| Type | PCI Express to USB Card |
| External USB Ports | PCI Express |
| External Ports | 2 x USB 3.1 Type-C Ports |
| Standard | USB 3.1 |
| Data Transfer Rate | Up to 10.0 Gbps |
| Operating Systems Supported | Windows 7/8/10/Linux/MAC OS 10.14 |
| Specifications | - 4 Internal SATA 6Gb/s Ports - Chipset: Marvell 88SE9215 - Supports Native Command Queue (NCQ) - Supports Port Multiplier FIS Based Switching or Command Based Switching - SATA ports are bootable - Compatible with SATA 6G, 3G and 1.5G Hard Drives - PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots - Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps - Supports any OS like Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux. - System Requirements: One available PCI Express X1, X4, X8 |
Insert the PCIe 4x connector into a PCIe x4, x8 or x16 slot — it will not work in a PCIe x1 slot — then secure the low-profile bracket if your case needs it.
No scheduled maintenance is required; the on-board over-current and short-circuit protection on each Type-C port handles fault conditions automatically.
The PCIe 2.0 x4 bus caps sustained throughput at roughly 16 Gbps total, so both ports cannot run at 10 Gbps simultaneously.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?