UOTEK
UOTEK UT-794I 4-Port RS-422/485 PCIe Serial Card DR44
Adds four optically isolated RS-422/485 ports via a PCIe x1 slot with 1.2 km reach and 600 W surge protection
- ConnectorsDR44
- InterfacePCI-Express
- Temperature-40~85°C
- 4-port RS-422/485 connectivity via single DR44 connector
- PCI Express x1 2.5Gbps bus for high-speed data transfer
- 2km transmission distance extends industrial network reach
- 600W surge and ±15KV ESD protection safeguards ports
- Wide -40°C to 85°C operating temperature suits harsh environments
Industrial serial expansion
The UOTEK UT-794I adds four RS-422 and RS-485 ports through a single PCI Express x1 slot. It targets industrial automation, building management and legacy equipment integration where long-distance serial links are required.
Build integration
The card occupies one x1 PCIe lane at 2.5 Gbps and connects via a DR44 connector to a breakout cable. Optical isolation and 600 W surge protection per line shield the host system from ground loops and transient voltages on the serial bus.
Sustained operation
Rated for continuous use from -40 °C to 85 °C, the adapter maintains signal integrity over 1.2 km at up to 921.6 Kbps. Hardware flow control and configurable parity, data and stop bits keep framing errors low during extended high-throughput sessions.
Highlights
- 4-port RS-422/485 connectivity via single DR44 connector
- PCI Express x1 2.5Gbps bus for high-speed data transfer
- 2km transmission distance extends industrial network reach
- 600W surge and ±15KV ESD protection safeguards ports
- Wide -40°C to 85°C operating temperature suits harsh environments
Specifications
| Brand | UOTEK |
|---|---|
| Model | UT-794I |
| Connectors | DR44 |
| Interface | PCI-Express |
| Temperature | -40~85°C |
Questions about this item
How far can the RS-422/485 signals travel on the UT-794I without repeaters?
The card supports up to 1.2 km transmission distance for both RS-422 and RS-485 modes.
What surge and ESD protection does each port provide under continuous industrial operation?
Each RS-422/485 line includes 600 W surge protection and ±15 kV ESD protection.
What slot type and cable does the DR44 connector on this card require?
It installs in a PCI Express x1 slot and uses a single DR44 connector for all four ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…



