We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Uptite Company

Uptite Company UV Purple LED Strip 30cm 18leds 5050 S Series 2nd Gen Magnetic Molex 12V

SKU CH-YGXZ-K7NH7

A 30 cm UV-purple LED strip with 18 × 5050 SMDs, magnetic mounting and a Molex 12 V connector

  • Magnetic mounting secures strips to iron case panels
  • 18 UV-purple 5050 LEDs deliver intense glow
  • 12 V Molex plug-and-play powers both strips
  • Pair of 30 cm strips covers broad area
  • 20 cm cable plus 30 cm strip gives 50 cm reach

UV Purple LED Strip 30 cm

Two 30 cm strips each contain 18 SMD 5050 LEDs and connect via a Molex plug to a 12 V rail. The magnets use black sintered NdFeB material and hold only on ferrous surfaces inside the case.

Upgrade from basic single-colour strips

The UV wavelength makes fluorescent coolant, cables or paint glow brighter than standard purple LEDs. The jump is worth it when you want reactive lighting without adding a separate controller or software.

Check clearance and power before ordering

Verify the case has flat steel panels for the magnets to grip and a free Molex connector on the PSU. The 20 cm lead per strip limits placement to areas within that reach of the power cable.

Highlights

  • Magnetic mounting secures strips to iron case panels
  • 18 UV-purple 5050 LEDs deliver intense glow
  • 12 V Molex plug-and-play powers both strips
  • Pair of 30 cm strips covers broad area
  • 20 cm cable plus 30 cm strip gives 50 cm reach

Specifications

No published specifications for this item yet.

Questions about this item

Will the 30 cm strips with magnets attach to any metal surface inside the case?

The black sintered NdFeB magnets hold the strips firmly on iron or steel surfaces; they will not stick to aluminium, plastic or non-ferrous panels.

How do I connect the Molex plug without powering the strip before the PSU is off?

Route the 7.9 in cable to a free Molex header, ensure the system is powered down and unplugged, then press the keyed connector in until it clicks — reversing it can bend pins.

When should I replace the 5050 SMD LEDs if the UV output fades?

The 18 LEDs per strip are rated for long life at 12 V; plan to swap both 30 cm strips when the purple glow noticeably dims or becomes uneven.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.