SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
V-color
64 GB DDR5 ECC registered kit with four 16 GB modules at 6400 MHz CL32 for W790 workstations
Capacity 64GB (4 x 16GB)
Struck-through versions exist but are not stocked here.
Speed DDR5 6400 (PC5 51200)
Struck-through versions exist but are not stocked here.
This V-color DDR5 kit provides 64 GB across four 16 GB registered DIMMs running at 6400 MHz with CL32 timings. It uses SK Hynix ICs on 10-layer PCBs and includes on-board ECC plus a thermal sensor rated for 0 to 85 °C operation. The modules are validated for Intel XMP on W790 workstation motherboards only.
Builders configuring W790 workstations that require registered ECC memory with XMP support will find this kit compatible. Buyers who need memory for standard desktop PCs or laptops cannot use these modules because they are electrically and mechanically incompatible with consumer platforms.
Under continuous workloads the integrated thermal sensor monitors module temperature to prevent overheating within the 0 to 85 °C range. ECC corrects single-bit errors in real time while registered buffering reduces electrical load on the memory controller during extended sessions.
| Brand | V-Color |
|---|---|
| Series | OC R-DIMM |
| Model | TR516G64S832Q |
| Part Number | TR516G64S832Q |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | SK Hynix IC |
| Heat Spreader | Yes |
| Compatible System | W790 Workstation |
| Features | Overclocking R-DIMM ECC Registered DIMM Memory for W790 Workstation (Intel XMP) |
Yes, the kit is designed exclusively for W790 workstation motherboards and is not compatible with standard desktop PCs or laptops.
No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC memory; the platform requires all slots to use registered ECC modules.
Enter the BIOS and verify the memory frequency reads 6400MT/s with timings 32-39-39-102, and check that the XMP profile is enabled.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?