We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black circuit board adapter with SATA connectors and a toggle switch, 2.5 inch form factor

WRIARICH

WRIARICH mSATA/M.2 NGFF to SATA Adapter 2.5" SATA III B&M Key 4TB 500MB/s

SKU CH-B3XM-YQGKX

Converts mSATA or M.2 NGFF SSDs to 2.5-inch SATA with a physical switch, supporting up to 4 TB capacity and 500 MB/s read speed

  • ColorBlack
  • Changer TypeSATA
  • SpecificationsmSATA/M.2 NGFF to SATA, SATA, 2, 3.94 L x 2.75 W x 0.275 H i
  • Connector ASATA
  • Connector BSATA
  • Connector PlatingHdmi
  • Converts mSATA and M.2 NGFF SSDs to 2.5" SATA for easy laptop upgrades
  • Toggle switch selects between mSATA and NGFF drives one at a time
  • Supports drives up to 4TB with SATA III speeds up to 500MB/s
  • Compact black casing weighs 41 grams and dissipates heat
  • Works with Windows 7 8 10 11 Mac OS and Linux systems

What this adapter does

The WRIARICH mSATA/M.2 NGFF to SATA adapter converts B-key or B&M-key SATA SSDs to a 2.5-inch SATA III form factor. It supports mSATA and M.2 NGFF drives up to 4TB capacity with a reference read speed of 500MB/s. The board includes a toggle switch to select between the two installed drives, which cannot operate simultaneously. It is intended for users upgrading laptops or desktops that only accept 2.5-inch SATA drives.

Thermals noise and power

The compact black casing is described as dissipating heat quickly while resisting drops and wear. No active cooling or fan is present, so operation is silent. Power is drawn from the host SATA connection; the supplier notes that rear USB ports on desktops or built-in laptop ports should be used to avoid insufficient power. No specific power-draw figure is provided.

Accessories and setup impact

The package contains only the adapter board; no cables, brackets or software are bundled. The supplier recommends formatting and partitioning a new drive via Disk Management before first use. Drives must be unencrypted, as the adapter cannot decode encryption. If a drive remains unrecognised, the supplier suggests trying a different brand-name SSD.

Highlights

  • Converts mSATA and M.2 NGFF SSDs to 2.5" SATA for easy laptop upgrades
  • Toggle switch selects between mSATA and NGFF drives one at a time
  • Supports drives up to 4TB with SATA III speeds up to 500MB/s
  • Compact black casing weighs 41 grams and dissipates heat
  • Works with Windows 7 8 10 11 Mac OS and Linux systems

Specifications

BrandSoNNeT
SeriesmSATA/M.2 NGFF to SATA
ModelmSATA/M.2 NGFF to SATA
ColorBlack
Changer TypeSATA
SpecificationsmSATA/M.2 NGFF to SATA, SATA, 2, 3.94 L x 2.75 W x 0.275 H inches, 41 grams, Hdmi, ELUTENG, Laptop
Connector ASATA
Connector BSATA
Connector PlatingHdmi
Connector StyleStandard
FeaturesSATA, Hdmi, Laptop, 2, ELUTENG, mSATA/M.2 NGFF to SATA
Dimensions20'
Weight41 grams
Package Quantity1

Questions about this item

How do I install an M.2 SATA or mSATA drive into this adapter?

Insert the drive into the matching slot, secure it with the screw, then set the side switch up for NGFF or down for mSATA — only one drive works at a time

What upkeep will this adapter need over time?

No scheduled maintenance; keep the vents clear and reseat the drive if the system stops detecting it

What throughput limit appears first during long transfers?

The SATA III interface caps sustained reads at 500MB/s, so the drive cannot exceed that rate

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.