We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black DDR4 memory sticks with low-profile heat spreaders, no LEDs

XPG

XPG GAMMIX D35 16GB (2x8GB) DDR4 3600 CL18 Black

SKU CH-WRMP-EKENA

A 16 GB dual-channel DDR4 kit running at 3600 MT/s with CL18 latency and a black heat spreader

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3600 (PC4 28800)
  • CAS LatencyCL18
  • ColorBlack
  • Heat SpreaderYes
  • LED ColorNone

Capacity 16GB (2 x 8GB)

  • DDR4 3600 speed for responsive gaming and multitasking
  • 16GB dual-channel kit (2×8GB) gives ample capacity for modern workloads
  • CL18 latency keeps data access tight at high frequency
  • Black aluminium heat spreader dissipates heat without LED distraction
  • Low 1.35V operation runs cool from 0°C to 85°C

Capacity and Speed

The XPG GAMMIX D35 is a 16GB DDR4 desktop memory kit built from two 8GB modules rated at 3600MHz with CL18 latency. It targets gamers and enthusiasts who want a straightforward upgrade for standard DDR4 platforms.

Headroom and Limits

Running at 1.35V with a black heat spreader, the kit operates reliably between 0°C and 85°C. The modules fit the standard U-DIMM form factor at 133.35mm long, 34mm wide and 5.9mm high, so they install in typical desktop slots without clearance surprises.

Deciding Specification

The critical figure is the DDR4 3600 CL18 rating paired with a 16GB dual-channel capacity. Buyers needing higher frequencies, lower latencies, RGB lighting or larger single-module densities should look elsewhere, as this kit delivers exactly the specified speed and capacity without extras.

Highlights

  • DDR4 3600 speed for responsive gaming and multitasking
  • 16GB dual-channel kit (2×8GB) gives ample capacity for modern workloads
  • CL18 latency keeps data access tight at high frequency
  • Black aluminium heat spreader dissipates heat without LED distraction
  • Low 1.35V operation runs cool from 0°C to 85°C

Specifications

BrandXPG
SeriesGAMMIX D35
Capacity16GB (2 x 8GB)
SpeedDDR4 3600 (PC4 28800)
CAS LatencyCL18
ColorBlack
Heat SpreaderYes
LED ColorNone

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 3600 CL18 XPG GAMMIX D35 kit run on a motherboard that only supports DDR4 3200?

The modules will operate at the board's maximum supported speed, typically 3200 with CL16 timings at 1.35V, while remaining fully stable.

How can I verify the kit is running at its rated 3600 CL18 after installation?

Enable the XMP profile in the BIOS, then check the reported frequency and latency in CPU-Z or the firmware's memory information screen.

What is included with the 16GB (2x8GB) GAMMIX D35 package and what must be purchased separately?

The box contains two black 8GB U-DIMM modules with integrated heat spreaders; no extra cables, brackets or software are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.