Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 256GB (8 x 32GB) DDR5 4800 ECC Registered RDIMM CL40 1.1V memory upgrade

SKU CH-SQWQ-QKAKS

Eight 32 GB DDR5 ECC registered RDIMMs running at 4800 MHz with CL40 latency and 1.1 V operation for the Supermicro H14DST-FL motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Pokaż jeszcze 30 konfiguracji
  • 256 GB total capacity from eight 32 GB modules for dense server workloads
  • DDR5 4800 speed rated at PC5-38400 with CL40 latency for rated throughput
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-FL motherboard compatibility

256GB DDR5 ECC RDIMM kit for Supermicro H14DST-FL

This 256GB kit contains eight 32GB DDR5 4800 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-FL memory controller expects. Registered ECC architecture allows every slot to run fully populated at rated speed while correcting single-bit errors on the fly. It is not suited for workstations that require unbuffered UDIMMs or for systems limited to lower maximum capacities.

Capacity and headroom

Eight 2Rx8 modules deliver 256GB total capacity at DDR5 4800 (PC5 38400) with CL40 latency and 1.10V operation. Full population is supported by the registered design, so the board can address the complete kit without downclocking. Headroom ends at the motherboard's qualified maximum; configurations needing more memory or faster speeds than the platform validates cannot use this kit.

Thermals, noise and power

Modules operate at the standard DDR5 1.1V without heat spreaders, relying on server chassis airflow for cooling. Power draw scales with all eight slots active, but registered buffering reduces electrical load on the memory controller. No fans or moving parts are present, so the kit adds no acoustic noise beyond the system's existing cooling.

Najważniejsze cechy

  • 256 GB total capacity from eight 32 GB modules for dense server workloads
  • DDR5 4800 speed rated at PC5-38400 with CL40 latency for rated throughput
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-FL motherboard compatibility

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will the 288-pin DDR5 4800 RDIMM kit work in my Supermicro H14DST-FL alongside any existing DDR5 modules?

The kit is verified for the Supermicro H14DST-FL. Matching speed, voltage, rank and ECC type avoids timing conflicts, but mixed-capacity population rules are set by the motherboard manual.

How can I confirm the 256 GB kit is running at DDR5 4800 with ECC active after installation?

Enter the BIOS or UEFI and verify the memory speed reads 4800 MT/s, total capacity shows 256 GB, and ECC status is reported as enabled or active.

Does the 8 x 32 GB package include heat spreaders or any cables, or must I buy them separately?

The modules ship without heat spreaders and no cables are included; the kit contains only the eight 288-pin RDIMMs.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.