Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Six green DDR5 RDIMM modules in a row, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 288GB (6 x 48GB) CL40 1.1V ECC Registered RDIMM for Supermicro H14DST-F memory upgrade

SKU CH-FY78-HF97E

A 288 GB kit of six 48 GB DDR5 4800 CL40 registered ECC RDIMMs at 1.1 V for Supermicro H14DST-F servers

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Pokaż jeszcze 30 konfiguracji
  • Full 288 GB capacity from six matched 48 GB modules
  • DDR5 4800 speed with CL40 timing runs at rated performance
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation reduces power draw in fully populated servers
  • Verified fit for the Supermicro H14DST-F motherboard

Exact-match DDR5-4800 kit for Supermicro H14DST-F

This 288GB kit delivers six 48GB registered ECC RDIMMs built to the precise rank, voltage, and timing the board's memory controller expects. It targets administrators upgrading a Supermicro H14DST-F server who need full-capacity recognition at rated speed without manual tuning.

Replaces partial or mismatched populations

The kit eliminates the guesswork of mixing modules by providing a validated 6 x 48GB set that satisfies the motherboard's population rules. The jump is worth it when the current configuration leaves slots empty, mixes ranks, or forces the controller to down-clock because unregistered or incorrect-voltage DIMMs are installed.

288GB registered ECC capacity with CL40 latency

Six dual-rank modules give the headroom for large virtualization hosts, in-memory databases, or heavy container workloads while ECC corrects single-bit errors on the fly. The limit appears when the workload exceeds 288GB or demands frequencies beyond DDR5-4800, at which point a platform change becomes necessary.

Najważniejsze cechy

  • Full 288 GB capacity from six matched 48 GB modules
  • DDR5 4800 speed with CL40 timing runs at rated performance
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation reduces power draw in fully populated servers
  • Verified fit for the Supermicro H14DST-F motherboard

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Does the 288-pin DDR5 RDIMM form factor fit the Supermicro H14DST-F memory slots?

Yes, the kit uses the 288-pin RDIMM form factor that the H14DST-F requires; it is not a UDIMM or SODIMM and matches the board's physical slot layout.

What is the correct population order for the six 48 GB modules on the H14DST-F?

Install the modules in the exact slot sequence shown in the Supermicro H14DST-F manual; the board's memory-population rules dictate which slots must be filled first for full 288 GB recognition.

Will the ECC Registered RDIMM modules require any firmware updates or ongoing maintenance?

No firmware updates are needed for the modules themselves; ECC error correction and registered buffering operate automatically once the system is configured per the motherboard manual.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.