We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 4800 288GB (6 x 48GB) CL40 1.1V ECC Registered RDIMM for Supermicro H14DST-F memory upgrade

SKU CH-FY78-HF97E

A 288 GB kit of six 48 GB DDR5 4800 CL40 registered ECC RDIMMs at 1.1 V for Supermicro H14DST-F servers

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Full 288 GB capacity from six matched 48 GB modules
  • DDR5 4800 speed with CL40 timing runs at rated performance
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation reduces power draw in fully populated servers
  • Verified fit for the Supermicro H14DST-F motherboard

Exact-match DDR5-4800 kit for Supermicro H14DST-F

This 288GB kit delivers six 48GB registered ECC RDIMMs built to the precise rank, voltage, and timing the board's memory controller expects. It targets administrators upgrading a Supermicro H14DST-F server who need full-capacity recognition at rated speed without manual tuning.

Replaces partial or mismatched populations

The kit eliminates the guesswork of mixing modules by providing a validated 6 x 48GB set that satisfies the motherboard's population rules. The jump is worth it when the current configuration leaves slots empty, mixes ranks, or forces the controller to down-clock because unregistered or incorrect-voltage DIMMs are installed.

288GB registered ECC capacity with CL40 latency

Six dual-rank modules give the headroom for large virtualization hosts, in-memory databases, or heavy container workloads while ECC corrects single-bit errors on the fly. The limit appears when the workload exceeds 288GB or demands frequencies beyond DDR5-4800, at which point a platform change becomes necessary.

Highlights

  • Full 288 GB capacity from six matched 48 GB modules
  • DDR5 4800 speed with CL40 timing runs at rated performance
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation reduces power draw in fully populated servers
  • Verified fit for the Supermicro H14DST-F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 288-pin DDR5 RDIMM form factor fit the Supermicro H14DST-F memory slots?

Yes, the kit uses the 288-pin RDIMM form factor that the H14DST-F requires; it is not a UDIMM or SODIMM and matches the board's physical slot layout.

What is the correct population order for the six 48 GB modules on the H14DST-F?

Install the modules in the exact slot sequence shown in the Supermicro H14DST-F manual; the board's memory-population rules dictate which slots must be filled first for full 288 GB recognition.

Will the ECC Registered RDIMM modules require any firmware updates or ongoing maintenance?

No firmware updates are needed for the modules themselves; ECC error correction and registered buffering operate automatically once the system is configured per the motherboard manual.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.