We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB 16x16GB CL46 1.1V Supermicro H14DSG-OM memory upgrade

SKU CH-STJA-0H45N

A 256 GB DDR5-5600 registered ECC kit of sixteen 16 GB modules at 1.1 V CL46, validated for the Supermicro H14DSG-OM motherboard

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 16X16GB

Show 30 more configurations
  • 256 GB total capacity from 16 matched 16 GB modules
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and supports full population
  • 1 V operation matches the Supermicro H14DSG-OM memory controller spec
  • Exact-fit 288-pin RDIMM kit validated for the target motherboard

Exact-match DDR5-5600 kit for Supermicro H14DSG-OM

This 256 GB kit contains sixteen 16 GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It targets administrators who need full-capacity population on this specific platform.

Replaces mixed or partial DIMM sets that limit

The jump is worth it when the board requires every slot filled with 1Rx8 Registered modules at 1.1 V and CL46 to reach 256 GB at rated speed. It is not for systems that accept only UDIMMs or SODIMMs, or for builds that cannot use Registered ECC memory.

Straightforward 288-pin RDIMM installation

Modules key into the board's DDR5 slots in the population order listed in the Supermicro manual. The usual problem is ignoring that order or mixing ranks, which prevents the system from recognising the full 256 GB.

Highlights

  • 256 GB total capacity from 16 matched 16 GB modules
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and supports full population
  • 1 V operation matches the Supermicro H14DSG-OM memory controller spec
  • Exact-fit 288-pin RDIMM kit validated for the target motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin RDIMM modules fit the Supermicro H14DSG-OM motherboard slots?

Yes. The kit uses the 288-pin DDR5 RDIMM form factor that the H14DSG-OM requires; it is not a UDIMM or SODIMM.

What is the correct population order when installing all 16 modules?

Consult the motherboard manual for the approved DIMM population sequence; the board’s memory-controller rules dictate which slots must be filled first.

Do these registered ECC modules require any periodic maintenance or replacement?

No scheduled maintenance is needed; the registered ECC design corrects single-bit errors on the fly, and the modules are covered by a lifetime replacement warranty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.