Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black metal cage with four front drive slots and a 40mm rear fan

ICY DOCK

ICY DOCK MB324SP-B 4 x 2.5" to 5.25" SSD accessory

SKU CH-BC4M-HGPGY MPN MB324SP-B

Converts one 5.25" bay into four hot-swappable 2.5" SATA/SAS drive slots with 6 Gb/s transfer and adjustable fan cooling

  • ColorBlack
  • Conversion Tray4 x 2.5" Drive to 5.25" Bay
  • Mobile Rack Drives SupportSingle 5.25" half height device bay to 4 x 2.5" SATA or SAS
  • Mobile Rack InterfaceSATA I/II/III/SAS
  • Protection CaseMultiple Drives
  • Compatible Products2.5"

Model 4 x 2.5in

Option Express Cages 4Bay

  • Fits four 2.5" SATA or SAS drives into one 5.25" bay for maximum storage density
  • Hot-swappable bays let you swap drives without powering down the system
  • Tool-less ExpressTray system enables quick drive installation comparable to tray-less designs
  • Adjustable 40mm fan with high, low and auto settings keeps drives cool under load
  • Supports 7mm, 9.5mm and 12.5mm drive heights for broad compatibility

4 x 2.5" to 5.25" Hot-Swap Cage

The ICY DOCK MB324SP-B fits four 2.5-inch SATA or SAS drives into one 5.25-inch half-height bay. It uses a removable ExpressTray system for tool-less installation and provides hot-swap capability for quick drive changes. A 40 mm fan with high, low and auto speed settings delivers active cooling. The unit connects via four 7-pin SATA data ports and a single 15-pin SATA power connector.

Suits builders adding dense SATA or SAS storage

This cage serves system builders who want up to four 2.5-inch drives in a single optical bay with hot-swap convenience. It supports 7 mm, 9.5 mm and 12.5 mm drive heights and works with SATA 6 Gb/s or single-channel SAS hosts. Buyers whose chassis have no 5.25-inch bay cannot install it. Users needing more than four drives or a different bay form factor must choose another solution.

Single 15-pin SATA power for four drives

The backplane draws all power for four drives through one 15-pin SATA connector, so the power supply must provide that lead. Four separate 7-pin SATA data cables are required to reach the host controller. Verify that your board or HBA has four free SATA ports and a spare 15-pin power plug before purchase.

Pontos fortes

  • Fits four 2.5" SATA or SAS drives into one 5.25" bay for maximum storage density
  • Hot-swappable bays let you swap drives without powering down the system
  • Tool-less ExpressTray system enables quick drive installation comparable to tray-less designs
  • Adjustable 40mm fan with high, low and auto settings keeps drives cool under load
  • Supports 7mm, 9.5mm and 12.5mm drive heights for broad compatibility

Especificações

BrandICY DOCK
ModelMB324SP-B
ColorBlack
Conversion Tray4 x 2.5" Drive to 5.25" Bay
Mobile Rack Drives SupportSingle 5.25" half height device bay to 4 x 2.5" SATA or SAS (single channel) HDD/SSD
Mobile Rack InterfaceSATA I/II/III/SAS
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsHost Interface: 4 x 7pin SATA
Compatible Drive Heights: 7mm, 9.5mm & 12.5mm
Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed)
Power Input: Single 15pin SATA power port
Insert& Extract connection Via: Direct SAS/ SATA hard drive connection
Structure: Plastic and metal
Drive Cooling: 40mm rear cooling fan
Fan Speed Control: High / Low / Auto jumper
Power Indicator: Solid blue LED
HDD Access Indicator: Blinking blue LED
Dimension: 5.53" x 1.63" x 5.74"
Weight: 0.97 lb.
FeaturesSupports up to 4 x 2.5" SATA/SAS HDD/SSD into a single 5.25" bay
Support SATA 6Gbps or SAS single channel (requires SAS host)
Hot-swappable bays for quick drive installation
Accommodates 2.5" drives with 7mm, 9.5mm &12.5mm Height
Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
Removable ExpressTray system for tool-less, easy installation comparable to tray-less designs
Peso de envio0.52 kg
Dimensões da embalagem155 × 152 × 51 mm

Outras versões deste modelo

Mais 4 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does my motherboard need four free SATA ports and a SATA power connector to use all four bays?

Yes, the unit connects through four 7-pin SATA data ports and a single 15-pin SATA power plug, so each drive needs its own data cable and the cage draws power from one SATA power lead.

Can I keep my older 3 Gbps SATA SSDs in this cage alongside newer 6 Gbps drives?

The backplane supports SATA I, II and III signalling up to 6 Gbps, so legacy 3 Gbps drives will operate at their native speed while newer drives run at 6 Gbps on the same four ports.

How do I confirm the fan is actually cooling the drives after I build the system?

Set the jumper to HIGH, LOW or AUTO; in AUTO mode the 40 mm fan speeds up when drive temperature rises, and you can verify airflow by feeling exhaust at the rear or monitoring drive temperatures in your OS.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.