Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Silver 2.5 inch SATA SSD with black label, 960 GB capacity

Kingston Technology Corp.

Kingston Technology Corp. SEDC600M/960G 960 GB 2.5" SATA enterprise SSD

SKU CH-98TS-XA981 MPN SEDC600M/960G

A 2.5-inch SATA enterprise SSD with 960 GB capacity, 256-bit AES encryption and 1 DWPD endurance for mixed-use server workloads

  • Form Factor2.5"
  • Capacity960GB
  • Memory Components3D TLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 560 MBps
  • Max Sequential WriteUp to 530 MBps

Options 960GB

  • 960 GB capacity stores large datasets
  • 560 MB/s read and 530 MB/s write speeds accelerate workloads
  • 256-bit AES hardware encryption protects data at rest
  • 1 DWPD endurance with 1752 TBW supports mixed-use deployments
  • 2 million hour MTBF and power-loss protection ensure server reliability

Enterprise SATA SSD for mixed workloads

The Kingston SEDC600M/960G is a 960 GB 2.5-inch SATA III solid-state drive built for server and storage arrays. It uses 3D TLC NAND and includes hardware-based power loss protection plus 256-bit AES self-encryption. The drive targets mixed read-write environments that demand consistent latency and data integrity.

1 DWPD endurance with 1752 TBW rating

Endurance is specified at one full drive write per day over five years, totalling 1752 terabytes written. This figure determines whether the drive suits your write-intensive application profile. Workloads that exceed this daily write volume will require a higher endurance tier.

Sustained performance within thermal limits

Sequential throughput reaches up to 560 MBps read and 530 MBps write while random 4 KB performance delivers up to 94,000 read IOPS and 65,000 write IOPS. Average active power stays at 1.45 W with peaks of 3.6 W during write bursts. The drive operates continuously from 0 °C to 70 °C and carries a 2,000,000-hour MTBF rating.

Pontos fortes

  • 960 GB capacity stores large datasets
  • 560 MB/s read and 530 MB/s write speeds accelerate workloads
  • 256-bit AES hardware encryption protects data at rest
  • 1 DWPD endurance with 1752 TBW supports mixed-use deployments
  • 2 million hour MTBF and power-loss protection ensure server reliability

Especificações

BrandKingston
ModelSEDC600M/960G
Form Factor2.5"
Capacity960GB
Memory Components3D TLC
InterfaceSATA III
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 530 MBps
4KB Random ReadUp to 94,000 IOPS
4KB Random WriteUp to 65,000 IOPS
Read Latency<130 µs
Write Latency<70 us
Endurance1 DWPD
Terabytes Written (TBW)1752TB
MTBF2,000,000 hours
Power Consumption (Idle)1.30W
Power Consumption (Active)Average: 1.45W
Max Read: 1.6W
Max Write: 3.6W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Vibration Resistance2.17G Peak (7-800Hz) operating
20G Peak (10-2000Hz) non-operating
Height7mm
Width100mm
Depth69.9mm
Weight92.34g
Peso de envio0.09 kg
Dimensões da embalagem184 × 131 × 8 mm

Outras versões deste modelo

Mais 4 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What does the 560 MB/s read speed mean once the drive is installed in a server?

The 560 MB/s sequential read is the SATA 6 Gb/s interface limit; real workloads will hit that ceiling on large-block transfers but random reads top out at 94,000 IOPS.

How does the SATA 6 Gb/s interface cap performance in practice?

The 600 MB/s bus ceiling limits sequential reads to 560 MB/s and writes to 530 MB/s; latency stays below 130 µs read and 70 µs write.

What does the 2.5-inch form factor need to fit in a server chassis?

A standard 2.5-inch drive bay with SATA data and power connectors; the drive draws up to 3.6 W during writes and operates from 0 °C to 70 °C.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.