Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Small transparent OLED board 1.51 inch 128 by 64 light blue

LORDWORLD

LORDWORLD 1.51inch Transparent OLED Display Module 128×64 Light Blue

SKU CH-VHRR-5QXQB

A 1.51 inch transparent OLED module with a 128×64 light blue display, embedded driver chip, and SPI or I2C interfaces for Raspberry Pi, Arduino, and STM32

  • Transparent 1.51inch OLED lets light through for see‑through UI projects
  • 128×64 pixel resolution renders crisp light‑blue graphics and text
  • Embedded driver chip handles panel timing without extra MCU load
  • SPI and I2C interfaces connect directly to Raspberry Pi, Arduino or STM32
  • Full viewing angle keeps content readable from any direction

1.51″ Transparent OLED for Makers

The LORDWORLD module is a 1.51inch transparent OLED display with a 128×64 resolution and light blue emission. It targets hobbyists and engineers building Raspberry Pi, Arduino or STM32 projects that need a see-through readout. The board ships new and includes an embedded driver chip to simplify integration.

SPI and I2C Dual Interface

The single specification that decides fit is the combined 4-wire SPI and I2C interface on one module. This dual option lets the display talk to almost any microcontroller without extra level-shifting hardware. If your host board lacks either bus, this part will not connect.

Embedded Driver Frees GPIO

Because the driver chip lives on the module, the host controller only needs the serial bus lines and power. No parallel data lines or timing-critical bit-banging are required, leaving more GPIO free for sensors or actuators. Development examples for the three supported platforms are available from the supplier.

Pontos fortes

  • Transparent 1.51inch OLED lets light through for see‑through UI projects
  • 128×64 pixel resolution renders crisp light‑blue graphics and text
  • Embedded driver chip handles panel timing without extra MCU load
  • SPI and I2C interfaces connect directly to Raspberry Pi, Arduino or STM32
  • Full viewing angle keeps content readable from any direction

Especificações

BrandLORDWORLD

Perguntas sobre este artigo

How does the 128×64 resolution look on the 1.51 inch transparent panel?

The 1.51 inch transparent OLED shows light blue graphics at 128×64 pixels, giving a crisp readout for status icons or sensor values in a compact see-through area.

What do the SPI and I2C interfaces limit in practice?

The module supports both 4-wire SPI and I2C, so you can choose the faster SPI path or the simpler two-wire I2C bus depending on your host board.

What mounting holes or connectors does the board need to fit a project?

The display ships as a bare module with a pin header for SPI/I2C; it has no mounting holes, so you secure it with a custom bracket or hot-melt adhesive in your enclosure.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.