Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Metal mobile rack for 2.5 U.2 NVMe SSD in 3.5 bay

LORDWORLD

LORDWORLD ToughArmor MB601VK-B 2.5" U.2 NVMe Mobile Rack for 3.5" Bay (147mm)

SKU CH-0NKJ-1RJ2P

Mounts one 2.5" U.2 NVMe, SAS or SATA SSD into a 3.5" bay with 147mm depth

  • Supports NVMe at 64Gb/s transfer rate
  • Handles SATA 6Gb/s and SAS 12Gb/s speeds
  • Accepts 2.5 U.2 NVMe, SAS or SATA SSDs
  • Fits any external 3.5" drive or floppy bay
  • Accommodates 5mm, 7mm, 9mm, 12.5mm & 15mm drive heights

Single-Drive U.2 Mobile Rack

The LORDWORLD ToughArmor MB601VK-B fits one 2.5-inch U.2 NVMe SSD or 2.5-inch SAS and SATA SSD into any external 3.5-inch drive bay or floppy bay. It accepts drive heights of 5mm, 7mm, 9mm, 12.5mm and 15mm. The unit depth is 147mm.

Host Interface Limits

An NVMe U.2 host connection is required to run an NVMe SSD at up to 64Gb/s. SATA SSDs operate at 6Gb/s and SAS SSDs at 12Gb/s on a single channel. PCIe 3.0 and 4.0 hosts are supported, but the host determines the final protocol and speed.

Drive Height Compatibility

The rack accommodates 2.5-inch SSDs measuring 5mm, 7mm, 9mm, 12.5mm and 15mm tall. Drives outside this height range cannot be installed. Builders needing multiple drives or a different bay form factor should choose another solution.

Pontos fortes

  • Supports NVMe at 64Gb/s transfer rate
  • Handles SATA 6Gb/s and SAS 12Gb/s speeds
  • Accepts 2.5 U.2 NVMe, SAS or SATA SSDs
  • Fits any external 3.5" drive or floppy bay
  • Accommodates 5mm, 7mm, 9mm, 12.5mm & 15mm drive heights

Especificações

BrandLORDWORLD

Perguntas sobre este artigo

Which SSD heights does the MB601VK-B accept?

The tray takes 2.5 inch U.2 NVMe, SAS or SATA SSDs from 5 mm up to 15 mm thick, so any standard enterprise drive fits without a shim.

What does the 64 Gb/s NVMe rate mean once the rack is installed?

It is the ceiling of the U.2 PCIe 3.0 or 4.0 link; actual throughput depends on the drive and host controller, but the rack itself adds no bottleneck.

Which host interface does the U.2 connector use and what speed does it cap?

The U.2 port carries PCIe 3.0 or 4.0 lanes for NVMe at 64 Gb/s, and falls back to SATA 6 Gb/s or SAS 12 Gb/s for legacy drives.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.