Mushkin Enhanced
Mushkin Enhanced Helix-L MKNSSDHL250GB-D8 250GB internal SSD
M.2 2280 250GB PCIe NVMe 1.3 drive with 3D TLC, 2010 MBps read, 1250 MBps write, 200000 read IOPS, 260000 write IOPS and MEDS data protection
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity250GB
- Memory Components3D TLC
- InterfacePCIe Gen3 x4 NVMe 1.3
- Up to 2010 MBps sequential read speeds accelerate large-file workflows
- Up to 1250 MBps sequential write speeds shorten project save times
- 200,000 random read IOPS deliver snappy application launches
- 260,000 random write IOPS keep multitasking responsive
- 1,500,000-hour MTBF rating backs long-term reliability
M.2 2280 NVMe drive for consumer builds
The Helix-L MKNSSDHL250GB-D8 is a 250GB internal SSD built on 3D TLC flash with a Silicon Motion SM2263XT controller. It targets everyday computing workloads in laptops, ultrabooks and desktops that need responsive storage without enterprise cost.
PCIe Gen3 x4 slot required for full speed
The drive plugs directly into an M.2 2280 key-M socket wired for PCIe Gen3 x4, delivering up to 32 Gbps of bus bandwidth. No cables or drive bays are needed, freeing internal space and simplifying cable routing in compact chassis.
Steady throughput under sustained load
Sequential reads reach 2010 MBps and writes 1250 MBps while random performance holds at 200000 read IOPS and 260000 write IOPS. Active power draw stays at 4.5W with idle at 0.3W, and the controller supports L1.2 low-power state for thermal stability during long sessions.
Pontos fortes
- Up to 2010 MBps sequential read speeds accelerate large-file workflows
- Up to 1250 MBps sequential write speeds shorten project save times
- 200,000 random read IOPS deliver snappy application launches
- 260,000 random write IOPS keep multitasking responsive
- 1,500,000-hour MTBF rating backs long-term reliability
Especificações
| Brand | Mushkin Enhanced |
|---|---|
| Series | Helix-L |
| Model | MKNSSDHL250GB-D8 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 250GB |
| Memory Components | 3D TLC |
| Interface | PCIe Gen3 x4 NVMe 1.3 |
| Controller | Silicon Motion SM2263XT |
| Max Sequential Read | Up to 2010 MBps |
| Max Sequential Write | Up to 1250 MBps |
| 4KB Random Read | Up to 200,000 IOPS |
| 4KB Random Write | Up to 260,000 IOPS |
| Seek Time | < 0.1 ms |
| MTBF | 1,500,000 hours |
| Features | MEDS (Mushkin Enhanced Data-protection Suite) ensures valuable data is protected - Built-in LDPC ECC provides the most-powerful data correction level in use today - End-to-end data path protection - Data shaping increases endurance - StaticDataRefresh ensures data integrity - Global wear-leveling evens program/erase counts across data blocks to extend lifespan Host Memory Buffer (HMB) supported (OS/driver support required) SLC caching accelerates burst performance L1.2 power mode support for ultra-low power consumption NVMe Security Erase support NVMe Deallocate function support (NVM |
| Power Consumption (Idle) | 0.3W |
| Power Consumption (Active) | 4.5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 3.80mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| Peso de envio | 0.03 kg |
| Dimensões da embalagem | 131 × 93 × 3 mm |
Perguntas sobre este artigo
What sequential-write speed does the 250 GB Helix-L sustain before its SLC cache fills?
The drive writes at up to 1250 MBps while the SLC cache is active; after the cache fills the native 3D TLC speed will be lower.
How much heat and power does the SSD produce during all-day workloads?
Active power draw is 4.5 W and the operating range is 0 °C to 70 °C; the controller supports L1.2 low-power mode to reduce heat when idle.
Which motherboard slot and protocol are required for this M.2 2280 drive?
A motherboard with an M.2 2280 slot wired for PCIe Gen3 x4 and NVMe 1.3 is needed; a SATA-only M.2 slot will not work.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
