NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 ECC UDIMM ASUS LOCKERSTOR
16 GB dual-channel DDR4 ECC UDIMM kit running at 2666 MHz with CL19 latency for ASUS Lockerstor NAS
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 ECC UDIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCYes
- 16GB dual-channel kit expands NAS capacity
- ECC UDIMM protects data integrity in ASUS Lockerstor
- DDR4 2666 CL19 delivers responsive server performance
- 2V low-voltage modules reduce power draw
- 288-pin unbuffered design enables simple DIY installation
ECC UDIMM kit for ASUS LOCKERSTOR NAS
This 16 GB kit contains two 8 GB DDR4 2666 CL19 ECC unbuffered UDIMMs built for the ASUS LOCKERSTOR AS-8GECD4-U. The modules run at 1.2 V and use a 288-pin layout with 1Rx8 organisation. Major OEM chips from Samsung, Micron or Hynix provide error-correcting protection for stored data. The kit targets NAS owners who need validated ECC memory for file serving, backup or virtualization workloads.
Upgrading from non-ECC or lower-capacity DDR4
Replacing standard unbuffered DDR4 without ECC adds single-bit error correction that protects against silent data corruption in ZFS or Btrfs pools. Moving from a single 8 GB module to this dual-channel 16 GB kit doubles bandwidth and capacity for heavier multi-user workloads. The jump is worthwhile when the NAS logs correctable errors, runs containers or serves many concurrent SMB connections. Builders who need more than 16 GB or registered DIMM support should look elsewhere.
Steady throughput under continuous NAS loads
ECC scrubbing and background parity checks run for hours without the error rate climbing, because the modules maintain CL19 timing at 1.2 V across sustained read and write streams. Unbuffered topology keeps latency low for random I/O in database or virtual-machine workloads. Absence of a heat spreader means airflow in the LOCKERSTOR chassis must be adequate; thermal throttling can appear if the NAS bay fans are restricted or dust-clogged.
Pontos fortes
- 16GB dual-channel kit expands NAS capacity
- ECC UDIMM protects data integrity in ASUS Lockerstor
- DDR4 2666 CL19 delivers responsive server performance
- 2V low-voltage modules reduce power draw
- 288-pin unbuffered design enables simple DIY installation
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS LOCKERSTOR NAS Memory |
| Model | ASUS LOCKERSTOR NAS Memory |
| Part Number | ME21300-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
Perguntas sobre este artigo
Will these 288-pin DDR4 UDIMM modules fit the memory slots in my ASUS Lockerstor NAS?
Yes, the 288-pin DDR4 ECC UDIMM form factor matches the DIMM slots used in compatible ASUS Lockerstor models such as the AS-8GECD4-U.
What is the correct way to install this 2x8GB kit, and what step do people often miss?
Power off the NAS, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click, then verify both 8GB sticks are recognised in the BIOS before closing the case.
Do these ECC UDIMM sticks need any firmware updates or periodic replacement?
No firmware updates are required for the memory itself; ECC UDIMMs are solid-state with no moving parts, so they do not have a scheduled replacement interval under normal operation.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



