NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR5 6400 CL52 1.1V ECC RDIMM Kit for Supermicro H13SRH
1TB server memory kit with eight 128GB DDR5 RDIMMs at 6400 CL52, registered ECC at 1.1V for Supermicro H13SRH
- Capacity1TB (8 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB capacity with eight 128GB modules for maximum server density
- DDR5 6400 speed at CL52 latency for high-throughput workloads
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 10V operation reduces power draw across all eight DIMMs
- Validated for Supermicro H13SRH motherboard with 288-pin RDIMM form factor
Exact-match DDR5 kit for Supermicro H13SRH
This 1 TB kit contains eight 128 GB DDR5 6400 RDIMM modules built to the CL52 1.10 V 2Rx4 specification the H13SRH memory controller expects. Registered ECC architecture allows every slot to be populated at full capacity while correcting single-bit errors on the fly. The 288-pin form factor matches the board's DIMM sockets precisely.
Kit contents and verified fitment
The package delivers the complete 1 TB configuration in a single matched set, eliminating the risk of mixing ranks or speeds that can prevent the server from booting. Compatibility is confirmed for the Supermicro H13SRH motherboard, so the modules are recognised at their rated DDR5 6400 speed without manual timing adjustments.
Suited for fully populated H13SRH deployments
Ideal for administrators expanding a Supermicro H13SRH to its maximum supported memory using registered ECC DIMMs. Not suitable for systems that require unbuffered UDIMMs, SODIMM form factors, or lower-density modules outside the 2Rx4 128 GB per DIMM specification.
Pontos fortes
- 1TB capacity with eight 128GB modules for maximum server density
- DDR5 6400 speed at CL52 latency for high-throughput workloads
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 10V operation reduces power draw across all eight DIMMs
- Validated for Supermicro H13SRH motherboard with 288-pin RDIMM form factor
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K8 |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Perguntas sobre este artigo
Will the 1.1V DDR5 RDIMMs need any firmware updates or periodic replacement to maintain ECC integrity?
The modules run at the standard 1.10V DDR5 voltage with on-die ECC; no firmware updates or scheduled replacement are required for error-correction integrity.
What thermal limit appears first when all eight 128GB RDIMMs run at 6400 MT/s continuously?
The registered 2Rx4 design offloads the memory controller, so the first sustained-use limit is the motherboard's DIMM-slot airflow rating rather than the modules themselves.
How much extra power draw and fan noise should I expect from the full 1TB kit under 24/7 load?
At 1.10V each 128GB RDIMM adds minimal incremental power; total kit draw stays within the H13SRH's standard memory-phase budget, so existing chassis fans handle cooling without audible increase.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



