We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 6400 CL52 1.1V ECC RDIMM Kit for Supermicro H13SRH

SKU CH-J4P1-RTCWN

1TB server memory kit with eight 128GB DDR5 RDIMMs at 6400 CL52, registered ECC at 1.1V for Supermicro H13SRH

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB capacity with eight 128GB modules for maximum server density
  • DDR5 6400 speed at CL52 latency for high-throughput workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 10V operation reduces power draw across all eight DIMMs
  • Validated for Supermicro H13SRH motherboard with 288-pin RDIMM form factor

Exact-match DDR5 kit for Supermicro H13SRH

This 1 TB kit contains eight 128 GB DDR5 6400 RDIMM modules built to the CL52 1.10 V 2Rx4 specification the H13SRH memory controller expects. Registered ECC architecture allows every slot to be populated at full capacity while correcting single-bit errors on the fly. The 288-pin form factor matches the board's DIMM sockets precisely.

Kit contents and verified fitment

The package delivers the complete 1 TB configuration in a single matched set, eliminating the risk of mixing ranks or speeds that can prevent the server from booting. Compatibility is confirmed for the Supermicro H13SRH motherboard, so the modules are recognised at their rated DDR5 6400 speed without manual timing adjustments.

Suited for fully populated H13SRH deployments

Ideal for administrators expanding a Supermicro H13SRH to its maximum supported memory using registered ECC DIMMs. Not suitable for systems that require unbuffered UDIMMs, SODIMM form factors, or lower-density modules outside the 2Rx4 128 GB per DIMM specification.

Highlights

  • 1TB capacity with eight 128GB modules for maximum server density
  • DDR5 6400 speed at CL52 latency for high-throughput workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 10V operation reduces power draw across all eight DIMMs
  • Validated for Supermicro H13SRH motherboard with 288-pin RDIMM form factor

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Will the 1.1V DDR5 RDIMMs need any firmware updates or periodic replacement to maintain ECC integrity?

The modules run at the standard 1.10V DDR5 voltage with on-die ECC; no firmware updates or scheduled replacement are required for error-correction integrity.

What thermal limit appears first when all eight 128GB RDIMMs run at 6400 MT/s continuously?

The registered 2Rx4 design offloads the memory controller, so the first sustained-use limit is the motherboard's DIMM-slot airflow rating rather than the modules themselves.

How much extra power draw and fan noise should I expect from the full 1TB kit under 24/7 load?

At 1.10V each 128GB RDIMM adds minimal incremental power; total kit draw stays within the H13SRH's standard memory-phase budget, so existing chassis fans handle cooling without audible increase.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.