NEMIX RAM
NEMIX RAM 512GB 4x128GB DDR5 4800 CL40 288-Pin ECC RDIMM Dell PowerEdge XE9680 memory upgrade
512 GB DDR5 4800 ECC registered server kit with four 128 GB modules for Dell PowerEdge XE9680
- Capacity512GB (4 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512 GB total capacity with four 128 GB modules
- DDR5 4800 speed rated at PC5-38400 for high throughput
- ECC registered design detects and corrects data errors
- 1 V operating voltage reduces power draw
- Validated for Dell PowerEdge XE9680 rack servers
Dell PowerEdge XE9680 memory kit
This 512GB kit contains four 128GB DDR5 ECC registered DIMMs built for the Dell PowerEdge XE9680 rack server. Each module runs at 4800 MT/s with CL40 latency and 1.1V operation. The 4Rx4 organisation and registered design target enterprise workloads that demand maximum capacity and data integrity.
Thermals and power at 1.1V
Operating at 1.10V keeps power draw low for high-density server configurations. The modules ship without heat spreaders, relying on the chassis airflow of the XE9680 for cooling. Registered buffering reduces electrical load on the memory controller, supporting stable operation under sustained multi-threaded loads.
Build and daily handling
The 288-pin RDIMM form factor matches the server's memory slots for direct installation. ECC circuitry corrects single-bit errors to protect critical data in production environments. Samsung, Micron or Hynix DRAM chips are used depending on supply, all validated for Dell compatibility. No heat spreaders means modules sit flush in tight DIMM arrays.
Pontos fortes
- 512 GB total capacity with four 128 GB modules
- DDR5 4800 speed rated at PC5-38400 for high throughput
- ECC registered design detects and corrects data errors
- 1 V operating voltage reduces power draw
- Validated for Dell PowerEdge XE9680 rack servers
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K4 |
| Capacity | 512GB (4 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (4X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Perguntas sobre este artigo
How do I install the 288-pin DDR5 RDIMM modules in the Dell PowerEdge XE9680, and what step is commonly missed?
Power down the server, open the chassis, align each 288-pin module with the slot key and press firmly until both retention clips lock; the step often missed is verifying the BIOS recognises all 512GB across the four 128GB modules before closing the case
What maintenance or replacement will this 4Rx4 ECC registered memory kit need over its service life?
The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server airflow clean; replacement is only required if a module fails ECC correction or the system logs uncorrectable errors
What limit appears first when the 4800MHz CL40 registered DIMMs run sustained workloads on the XE9680?
The 1.10V DDR5 modules operate within JEDEC limits, so the first constraint under sustained load is typically the server’s memory-controller thermal envelope rather than the DIMMs themselves
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00133514BTC
Em stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010161BTC
Em stock