我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 512GB 4x128GB DDR5 4800 CL40 288-Pin ECC RDIMM Dell PowerEdge XE9680 memory upgrade

SKU CH-C7D4-CCYR1

512 GB DDR5 4800 ECC registered server kit with four 128 GB modules for Dell PowerEdge XE9680

  • Capacity512GB (4 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity with four 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 for high throughput
  • ECC registered design detects and corrects data errors
  • 1 V operating voltage reduces power draw
  • Validated for Dell PowerEdge XE9680 rack servers

Dell PowerEdge XE9680 memory kit

This 512GB kit contains four 128GB DDR5 ECC registered DIMMs built for the Dell PowerEdge XE9680 rack server. Each module runs at 4800 MT/s with CL40 latency and 1.1V operation. The 4Rx4 organisation and registered design target enterprise workloads that demand maximum capacity and data integrity.

Thermals and power at 1.1V

Operating at 1.10V keeps power draw low for high-density server configurations. The modules ship without heat spreaders, relying on the chassis airflow of the XE9680 for cooling. Registered buffering reduces electrical load on the memory controller, supporting stable operation under sustained multi-threaded loads.

Build and daily handling

The 288-pin RDIMM form factor matches the server's memory slots for direct installation. ECC circuitry corrects single-bit errors to protect critical data in production environments. Samsung, Micron or Hynix DRAM chips are used depending on supply, all validated for Dell compatibility. No heat spreaders means modules sit flush in tight DIMM arrays.

商品特色

  • 512 GB total capacity with four 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 for high throughput
  • ECC registered design detects and corrects data errors
  • 1 V operating voltage reduces power draw
  • Validated for Dell PowerEdge XE9680 rack servers

商品規格

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K4
Capacity512GB (4 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (4X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

商品問答

How do I install the 288-pin DDR5 RDIMM modules in the Dell PowerEdge XE9680, and what step is commonly missed?

Power down the server, open the chassis, align each 288-pin module with the slot key and press firmly until both retention clips lock; the step often missed is verifying the BIOS recognises all 512GB across the four 128GB modules before closing the case

What maintenance or replacement will this 4Rx4 ECC registered memory kit need over its service life?

The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server airflow clean; replacement is only required if a module fails ECC correction or the system logs uncorrectable errors

What limit appears first when the 4800MHz CL40 registered DIMMs run sustained workloads on the XE9680?

The 1.10V DDR5 modules operate within JEDEC limits, so the first constraint under sustained load is typically the server’s memory-controller thermal envelope rather than the DIMMs themselves

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。