Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB DDR5-4800 ECC RDIMM 2Rx8 CL40 Supermicro H13SVW-N memory upgrade

SKU CH-JG2B-EDCZ9

96 GB DDR5-4800 ECC registered kit with two 48 GB modules at 1.1 V CL40 for Supermicro H13SVW-N

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Ver as outras 12 configurações

Speed 4800MHz

  • Full 96 GB capacity recognised at rated DDR5-4800 speed
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx8 organisation matches Supermicro H13SVW-N population rules
  • 10 V operation meets DDR5 standard voltage requirement
  • 288-pin RDIMM form factor fits the motherboard slots exactly

96GB DDR5-4800 ECC RDIMM Kit for Supermicro H13SVW-N

This 96GB kit contains two 48GB DDR5-4800 Registered ECC RDIMMs built to the exact rank, voltage, and timing the Supermicro H13SVW-N memory controller expects. It is designed for server administrators who need maximum supported capacity with full error correction and registered buffering for stable operation under continuous load.

Upgrade from lower-capacity

The jump is worth it when your workload demands the full 96GB capacity across both slots with 2Rx8 registered architecture and on-die ECC. Systems running virtualization, databases, or large in-memory datasets benefit from the registered design that offloads the memory controller and the ECC that corrects single-bit errors before they cause data corruption or unplanned reboots.

288-pin RDIMM installation follows motherboard

Install the modules in the sequence specified by the Supermicro H13SVW-N manual to ensure the board recognizes the full 96GB at DDR5-4800 CL40. Common issues include mixing registered and unbuffered DIMMs, populating slots in the wrong order, or skipping the BIOS configuration step required for registered memory initialization.

Pontos fortes

  • Full 96 GB capacity recognised at rated DDR5-4800 speed
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx8 organisation matches Supermicro H13SVW-N population rules
  • 10 V operation meets DDR5 standard voltage requirement
  • 288-pin RDIMM form factor fits the motherboard slots exactly

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13SVW-N motherboard slots?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the Supermicro H13SVW-N motherboard, matching the board's registered DIMM slots exactly.

What is the correct installation order for the two 48GB modules on the H13SVW-N?

Install the modules in the specific DIMM population sequence listed in the Supermicro H13SVW-N manual to ensure the memory controller recognises both 48GB modules at full 4800 MT/s speed.

Does the DDR5 ECC RDIMM kit require any firmware updates or ongoing maintenance after installation?

No scheduled maintenance is needed; the modules run at 1.1 V with on-die ECC and registered buffering, so stability is handled in hardware once the system BIOS is current.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.