Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Six green DDR5 RDIMM modules without heat spreaders in a clear tray

NEMIX RAM

NEMIX RAM DDR5 192GB 6x32GB 4800MHz CL40 1.1V ECC Registered RDIMM 288-Pin Supermicro H13SVW-N memory upgrade

SKU CH-3M9H-7NQRG

192 GB DDR5 server kit with six 32 GB registered ECC modules at 4800 MHz CL40 1.1 V for Supermicro H13SVW-N

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Ver as outras 12 configurações

Speed 4800MHz

  • 192 GB capacity in a matched 6 x 32 GB kit
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the board's voltage requirement
  • Verified 288-pin RDIMM fitment for the Supermicro H13SVW-N motherboard

Exact-fit DDR5 RDIMM kit for Supermicro H13SVW-N

This 192GB kit contains six 32GB DDR5-4800 registered ECC modules built to the board's required 2Rx8 rank, 1.10V voltage and CL40 timing. The 288-pin RDIMM form factor matches the motherboard's memory slots so the controller recognises full capacity at rated speed. Major OEM Samsung, Micron or Hynix chips provide enterprise-grade stability.

Who this suits and who should look elsewhere

Suits administrators upgrading a Supermicro H13SVW-N motherboard with a validated 192GB population that meets the board's registered ECC requirements. Not suited for systems that accept only unbuffered UDIMMs, SODIMM form factors, lower capacities or non-ECC memory. Buyers needing different voltages, ranks or speeds should verify their platform manual before ordering.

Installation notes and common pitfalls

Modules install like standard 288-pin RDIMMs; follow the motherboard manual for the approved population order across all channels. Common issues include mixing registered with unbuffered DIMMs, populating slots in the wrong sequence, or exceeding the board's maximum supported capacity per channel. No heat spreader is fitted, so ensure adequate chassis airflow for sustained server workloads.

Pontos fortes

  • 192 GB capacity in a matched 6 x 32 GB kit
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the board's voltage requirement
  • Verified 288-pin RDIMM fitment for the Supermicro H13SVW-N motherboard

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does the Supermicro H13SVW-N motherboard require all six DIMM slots to be populated for this 192GB kit to run at 4800MHz?

The kit contains six 32GB modules totalling 192GB and is built to the board's 288-pin RDIMM specification. Consult the motherboard manual for the approved population order and any slot-count rules before installing.

Can I mix these 2Rx8 CL40 registered ECC modules with older DDR5 RDIMMs that have a different rank or latency?

Mixing ranks, latencies or voltages is not recommended; the memory controller expects identical 2Rx8 CL40 1.1V modules across every populated channel for stable operation at 4800MHz.

How do I confirm the system recognises the full 192GB capacity and ECC function after installation?

Enter the BIOS or UEFI and verify the total memory reads 192GB at 4800MHz with ECC shown as active; the OS should also report the same capacity and corrected-error counters.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.