BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.002786BTC
Em stock
NEMIX RAM
NEMIX RAM CSE-E302iL3 8GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade
8GB DDR5 4800 SODIMM for Supermicro E302-13AD servers, CL40 1.1V unbuffered
- Capacity8GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 8GB DDR5 4800MHz capacity meets SuperMicro SYS-E302-13AD memory requirements
- CL40 CAS latency with 1.1V operation optimises power efficiency for IoT server workloads
- 1Rx8 single-rank organisation enables straightforward installation in 262-pin SODIMM slots
- Non-ECC unbuffered design matches X13SAV-PS motherboard specifications without compatibility concerns
- Samsung Micron Hynix major OEM chipsets ensure reliable performance under sustained enterprise loads
System-specific DDR5 SODIMM for Supermicro IoT
This 8 GB DDR5-4800 module is built for the Supermicro IoT SuperServer SYS-E302-13AD using the X13SAV-PS platform. It targets administrators who need a single 1Rx8 stick to fill a vacant 262-pin slot in that validated configuration.
Unbuffered non-ECC design with 1.1 V operation
The stick ships without a heat spreader and uses major-brand Samsung, Micron or Hynix chips on a standard green PCB. Its 262-pin SODIMM edge connector drops directly into the server's memory socket, and the 1.10 V rating matches the platform's default voltage rail.
DDR5-4800 bandwidth ceiling and CL40 latency
Running at PC5-38400, the module tops out at 4800 MT/s with a CAS latency of 40 cycles. Systems that require ECC protection, registered buffering or speeds beyond 4800 MT/s cannot use this part.
Pontos fortes
- 8GB DDR5 4800MHz capacity meets SuperMicro SYS-E302-13AD memory requirements
- CL40 CAS latency with 1.1V operation optimises power efficiency for IoT server workloads
- 1Rx8 single-rank organisation enables straightforward installation in 262-pin SODIMM slots
- Non-ECC unbuffered design matches X13SAV-PS motherboard specifications without compatibility concerns
- Samsung Micron Hynix major OEM chipsets ensure reliable performance under sustained enterprise loads
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-818K1 |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM |
Perguntas sobre este artigo
Does the DDR5 4800 SODIMM run at PC5-38400 speeds in the SuperMicro SYS-E302-13AD?
Yes, the module is rated DDR5 4800 PC5-38400 and will operate at that transfer rate when installed in the compatible SuperMicro system.
Will this 262-pin SODIMM fit the memory slot in the SuperMicro IoT SuperServer SYS-E302-13AD?
The module uses the standard 262-pin DDR5 SODIMM form factor required by the SuperMicro SYS-E302-13AD motherboard.
Is any BIOS change needed to install this non-ECC unbuffered DDR5 module in the X13SAV-PS board?
Insert the SODIMM at a 30-degree angle until the gold contacts disappear, then press down until the side clips click — the step often missed is not seating it fully before locking.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00281192BTC
Em stock
