我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM module with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM CSE-E302iL3 8GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade

SKU CH-TCNH-5A631 MPN CSE-E302iL3

8GB DDR5 4800 SODIMM for Supermicro E302-13AD servers, CL40 1.1V unbuffered

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 8GB DDR5 4800MHz capacity meets SuperMicro SYS-E302-13AD memory requirements
  • CL40 CAS latency with 1.1V operation optimises power efficiency for IoT server workloads
  • 1Rx8 single-rank organisation enables straightforward installation in 262-pin SODIMM slots
  • Non-ECC unbuffered design matches X13SAV-PS motherboard specifications without compatibility concerns
  • Samsung Micron Hynix major OEM chipsets ensure reliable performance under sustained enterprise loads

System-specific DDR5 SODIMM for Supermicro IoT

This 8 GB DDR5-4800 module is built for the Supermicro IoT SuperServer SYS-E302-13AD using the X13SAV-PS platform. It targets administrators who need a single 1Rx8 stick to fill a vacant 262-pin slot in that validated configuration.

Unbuffered non-ECC design with 1.1 V operation

The stick ships without a heat spreader and uses major-brand Samsung, Micron or Hynix chips on a standard green PCB. Its 262-pin SODIMM edge connector drops directly into the server's memory socket, and the 1.10 V rating matches the platform's default voltage rail.

DDR5-4800 bandwidth ceiling and CL40 latency

Running at PC5-38400, the module tops out at 4800 MT/s with a CAS latency of 40 cycles. Systems that require ECC protection, registered buffering or speeds beyond 4800 MT/s cannot use this part.

商品特色

  • 8GB DDR5 4800MHz capacity meets SuperMicro SYS-E302-13AD memory requirements
  • CL40 CAS latency with 1.1V operation optimises power efficiency for IoT server workloads
  • 1Rx8 single-rank organisation enables straightforward installation in 262-pin SODIMM slots
  • Non-ECC unbuffered design matches X13SAV-PS motherboard specifications without compatibility concerns
  • Samsung Micron Hynix major OEM chipsets ensure reliable performance under sustained enterprise loads

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K1
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM

商品問答

Does the DDR5 4800 SODIMM run at PC5-38400 speeds in the SuperMicro SYS-E302-13AD?

Yes, the module is rated DDR5 4800 PC5-38400 and will operate at that transfer rate when installed in the compatible SuperMicro system.

Will this 262-pin SODIMM fit the memory slot in the SuperMicro IoT SuperServer SYS-E302-13AD?

The module uses the standard 262-pin DDR5 SODIMM form factor required by the SuperMicro SYS-E302-13AD motherboard.

Is any BIOS change needed to install this non-ECC unbuffered DDR5 module in the X13SAV-PS board?

Insert the SODIMM at a 30-degree angle until the gold contacts disappear, then press down until the side clips click — the step often missed is not seating it fully before locking.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。