Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Six green DDR5 RDIMM modules in a row, black chips, no heat spreaders, 288-pin gold edges

NEMIX RAM

NEMIX RAM DDR5 4800 192GB 6x32GB CL40 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-VGYC-FRST2

192 GB DDR5-4800 ECC RDIMM kit of six 32 GB modules at 1.1 V CL40 for Supermicro H14DSG-O-CPU servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Ver as outras 30 configurações
  • 192GB total capacity from six 32GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on this platform
  • 1V operation reduces power draw across fully populated channels
  • Registered ECC architecture corrects single-bit errors and stabilises full-capacity loads
  • Verified fitment for Supermicro H14DSG-O-CPU with 288-pin RDIMM form factor

Exact-Match DDR5 Kit for Supermicro H14DSG-O-CPU

This 192GB kit contains six 32GB DDR5 4800 RDIMMs built to the exact rank, voltage and timing the motherboard expects. Registered ECC architecture offloads the memory controller and corrects single-bit errors to prevent silent data corruption. The modules run at 1.10V with CL40 latency and 2Rx8 organisation across 288 pins. Full-population stability is verified for the target platform.

Suited for capacity-bound server workloads

Ideal for administrators expanding a Supermicro H14DSG-O-CPU system to its maximum supported memory with matched modules that populate every slot correctly. Not for builds that need unbuffered UDIMMs, non-ECC memory, or a different DDR generation, as the board requires registered DDR5 RDIMMs only. Buyers who need a smaller increment or a different form factor should look elsewhere.

192GB total capacity in six 32GB modules

The single specification that decides fit is the exact 192GB (6 x 32GB) DDR5-4800 Registered ECC configuration with 2Rx8 rank structure and 1.10V operation. Your motherboard manual lists the approved population order and maximum capacity per channel; this kit matches those rules slot-for-slot. Verify the manual before purchase to confirm the configuration is supported.

Pontos fortes

  • 192GB total capacity from six 32GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on this platform
  • 1V operation reduces power draw across fully populated channels
  • Registered ECC architecture corrects single-bit errors and stabilises full-capacity loads
  • Verified fitment for Supermicro H14DSG-O-CPU with 288-pin RDIMM form factor

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does the 288-pin RDIMM form factor fit the Supermicro H14DSG-O-CPU motherboard DIMM slots?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the Supermicro H14DSG-O-CPU motherboard, so each module seats directly into the board's DDR5 DIMM slots.

What is the correct population order when installing all six 32 GB modules on the Supermicro H14DSG-O-CPU?

Follow the motherboard manual's DIMM population sequence for a six-module configuration; the typical mistake is filling slots out of order, which can prevent the system from recognising the full 192 GB capacity.

Will the ECC RDIMM modules require any firmware updates or component replacements during their service life?

The modules have no moving parts and no heat spreader; they do not need firmware updates or scheduled component replacements under normal server operation.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.