Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

NEMIX RAM

NEMIX RAM DDR5 4800 192GB (6x32GB) ECC RDIMM CL40 1.1V 2Rx8 Supermicro H14DSG-OD memory upgrade

SKU CH-G1JV-DJA61

192GB DDR5-4800 registered ECC kit in six 32GB modules at CL40 and 1.1V for Supermicro H14DSG-OD servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity for memory-intensive server workloads
  • DDR5-4800 speed with CL40 latency for rated performance
  • Registered ECC design prevents silent data corruption under load
  • 10 V operation at 2Rx8 rank matching controller expectations
  • 6 × 32 GB kit validated for Supermicro H14DSG-OD motherboard

192GB DDR5 ECC RDIMM kit for Supermicro H14DSG-OD

This 192GB kit contains six 32GB DDR5 4800 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DSG-OD memory controller expects. It is intended for administrators upgrading that specific server platform with registered ECC memory.

Capacity and registered headroom

Six dual-rank modules deliver 192GB total capacity while the registered architecture offloads the memory controller so every slot runs fully populated at the rated 4800 speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. The kit stops at 192GB; larger configurations need a different population plan.

288-pin DDR5 RDIMM form factor

Only 288-pin DDR5 Registered DIMMs fit this board; UDIMM or SODIMM modules are physically and electrically incompatible. Verify your system manual for approved DIMM population order before installation.

Pontos fortes

  • 192 GB total capacity for memory-intensive server workloads
  • DDR5-4800 speed with CL40 latency for rated performance
  • Registered ECC design prevents silent data corruption under load
  • 10 V operation at 2Rx8 rank matching controller expectations
  • 6 × 32 GB kit validated for Supermicro H14DSG-OD motherboard

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will this 192GB DDR5-4800 RDIMM kit work alongside any existing DDR5 modules I keep in my Supermicro H14DSG-OD?

Mixing kits is not recommended. For full 192GB capacity and rated DDR5-4800 CL40 operation, populate all six slots with this matched 6x32GB 2Rx8 registered ECC kit at 1.1V.

How can I verify the kit is running at DDR5-4800 CL40 with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to confirm each DIMM shows 4800 MT/s, CL40 timings, 1.1V, registered ECC type, and 2Rx8 organisation across all six slots.

What exactly ships in the box and do I need any extra parts to install it?

The box contains the 192GB kit as six 32GB 288-pin DDR5 RDIMMs. No extra cables, brackets or cooling are required; the motherboard slots provide power and retention.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.