Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 1.5TB (16 x 96GB) CL46 1.1V 2Rx4 Supermicro H14DSG-OM memory upgrade

SKU CH-X3TG-G8S1S

A 1.5 TB DDR5 kit of sixteen 96 GB registered ECC modules running at 5600 MT/s with CL46 latency for the Supermicro H14DSG-OM motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

Ver as outras 30 configurações
  • 5 TB total capacity lets memory-hungry workloads scale across 16 modules
  • DDR5 5600 speed with CL46 timing delivers rated throughput for the Supermicro H14DSG-OM
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation and 2Rx4 rank match the board's memory-population rules exactly
  • 288-pin RDIMM form factor fits the required server slots without adapters

Supermicro H14DSG-OM memory upgrade

This 1.5 TB DDR5 kit contains 16 registered ECC RDIMMs of 96 GB each, built to the exact rank, voltage and timing the H14DSG-OM memory controller expects. It is intended for administrators who need maximum supported capacity on this specific motherboard without trial-and-error population testing.

Thermals noise and power draw

Modules run at the standard DDR5 1.10 V and carry no heat spreaders, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller so every slot stays stable at full population, while ECC corrects single-bit errors before they affect uptime.

When the jump is worth it

The kit replaces smaller or mixed-capacity DDR5 RDIMM sets that leave slots empty or force the controller to down-clock. It is not for systems that only accept UDIMM or SODIMM form factors, for boards limited to lower maximum capacity per slot, or for workloads that do not require registered ECC memory.

Pontos fortes

  • 5 TB total capacity lets memory-hungry workloads scale across 16 modules
  • DDR5 5600 speed with CL46 timing delivers rated throughput for the Supermicro H14DSG-OM
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation and 2Rx4 rank match the board's memory-population rules exactly
  • 288-pin RDIMM form factor fits the required server slots without adapters

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I install the 16 DDR5 RDIMMs into the Supermicro H14DSG-OM, and which population step is most often missed?

Power down and unplug the server. Open the chassis and locate the 16 DDR5 slots. Follow the motherboard manual's exact population sequence for a 16-module, 2Rx4 configuration. The step most often missed is verifying the specific slot order required for full 1.5TB recognition before closing the case.

What maintenance or replacement will the NEMIX RAM DDR5 5600 ECC RDIMM kit need during its service life?

The modules have no heat spreaders and no moving parts, so no routine hardware maintenance is required. ECC corrects single-bit errors automatically. Replacement is only needed if a module fails; the lifetime replacement warranty covers that event.

What limit appears first when the 1.5TB DDR5-5600 kit runs sustained workloads on the H14DSG-OM?

The primary limit is the DDR5-5600 (PC5-44800) data rate and CL46 latency at 1.1V. With all 16 slots populated as 2Rx4 Registered DIMMs, the memory controller operates at this rated speed. Thermal throttling may occur if chassis airflow is insufficient for the dense 96GB-per-module layout.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.