Orico
Orico MSG-RC3-SV dual-bay mSATA drive enclosure
Holds two mSATA SSDs up to 4 TB total with RAID 0 or independent modes over USB 3.1 Gen 2 Type-C at 10 Gbps
- ColorSilver
- SizemSATA to USB3.1 Type-C/USB-C External SSD Enclosure
- TypeEnclosure
- MaterialAluminum
- Internal InterfacemSATA
- External InterfaceUSB 3.1 Type-C
- Dual mSATA bays deliver up to 4 TB total storage
- USB 3.1 Gen 2 Type-C provides 10 Gbps bandwidth
- RAID 0 or independent drive modes suit different workflows
- Aluminium body at 11 mm thick slips into any bag
- Includes 30 cm Type-C cable and screwdriver for quick setup
Dual-bay mSATA enclosure
The Orico MSG-RC3-SV holds two mSATA solid-state drives in a single aluminium chassis. It connects to a host computer through a USB 3.1 Gen 2 Type-C port that delivers up to 10 Gbps of bus bandwidth. The enclosure is powered entirely from the USB-C connection so no external adapter is required. It is aimed at users who want portable access to legacy mSATA media.
RAID 0 or independent access
Each bay accepts an mSATA drive up to 2 TB for a combined ceiling of 4 TB. In RAID 0 mode the two drives are striped together to double sequential throughput while the 10 Gbps link keeps the pipe full. In PM mode the drives appear as separate volumes so you can swap or manage them independently. Hot-swap support lets you change media without rebooting.
Slim aluminium build with USB-C cable
The case measures 5.43 x 1.69 x 0.43 inches and is just 11 mm thick, sliding easily into a bag or pocket. A 30 cm USB-C to USB-C cable is included for immediate connection to modern laptops and desktops. A screwdriver is supplied for drive installation and the tool-less screw-lock lid secures the drives without extra hardware.
Pontos fortes
- Dual mSATA bays deliver up to 4 TB total storage
- USB 3.1 Gen 2 Type-C provides 10 Gbps bandwidth
- RAID 0 or independent drive modes suit different workflows
- Aluminium body at 11 mm thick slips into any bag
- Includes 30 cm Type-C cable and screwdriver for quick setup
Especificações
| Brand | ORICO |
|---|---|
| Series | ORICO MSG-RC3-SV |
| Model | MSG-RC3-SV |
| Color | Silver |
| Size | mSATA to USB3.1 Type-C/USB-C External SSD Enclosure |
| Type | Enclosure |
| Material | Aluminum |
| Internal Interface | mSATA |
| External Interface | USB 3.1 Type-C |
| Number of Bay | 2 Bay |
| Maximum Capacity (per Bay) | Up to 4TB |
| Power | Type-C Interface Power Supply |
| Operating Systems Supported | Windows/Linux/Mac |
| Dimensions | 5.43" x 1.69" x 0.43" |
| Package Contents | 1 x SSD Enclosure 1 x Type-C to Type-C Cable - 30cm 1 x Screw Driver 1 x User Manual 1 x Service Card |
Perguntas sobre este artigo
Will the USB 3.1 Type-C Gen 2 10Gbps connection work with my older USB 3.0 Type-A ports?
Yes, the enclosure is backward compatible; plug the supplied Type-C to Type-C cable into a Type-C to Type-A adapter or cable and it will operate at the host port's maximum speed.
How can I confirm the two mSATA drives are running in RAID 0 at full 10Gbps bandwidth?
After setup, open Disk Management on Windows or Disk Utility on macOS; a single volume showing the combined capacity of both drives indicates RAID 0 is active, and benchmark tools will report transfer rates approaching the 10Gbps bus limit.
Does the box include everything needed to install two mSATA SSDs, or must I buy extra screws or cables?
The package contains the aluminum enclosure, a 30cm Type-C to Type-C cable, a screwdriver, a user manual and a service card; no additional screws or cables are required for a two-drive installation.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
