PANO-MOUNTS
PANO-MOUNTS 12038IP2510 120mm IP65 3500RPM 38mm 3-pin case fan
IP65-rated 120 mm case fan with 3500 RPM hydraulic bearing, 125 CFM airflow and 3-pin connector for wet or dusty environments
- Fan Size120mm
- LEDNon-LED
- TypeCase Fan
- Bearing TypeHydraulic
- RPM3500-3999 RPM
- Air Flow>80 CFM
- IP65 rating blocks dust and water ingress for reliable operation in wet or humid environments
- 3500 RPM delivers 125.2 CFM airflow to meet strong cooling demands
- Hydraulic bearing with self-protection stops the fan safely if obstructed to extend service life
- 3-pin 12 V connector with tach output enables straightforward installation across multiple equipment types
- 38 mm thick 120 mm frame fits standard case mounts while providing high static pressure
120mm IP65 Waterproof Case Fan
The PANO-MOUNTS 12038IP2510 is a 120mm case fan with a 38mm thick frame and an IP65 waterproof rating. It runs on 12V DC power through a standard 3-pin connector and uses a hydraulic bearing. The black, non-LED unit delivers airflow above 80 CFM at speeds between 3500 and 3999 RPM.
Suited for wet or dusty environments
This fan suits builders who need cooling in high-humidity or wet locations such as greenhouses, chicken houses, or industrial cabinets. The IP65 seal blocks dust and water ingress. Buyers who want a quiet fan for a silent desktop should look elsewhere, as noise exceeds 50 dBA. Those needing PWM speed control or RGB lighting will not find those features here.
Check 38mm clearance and 3-pin header
Before ordering, verify that your chassis or mounting location can accommodate a 38mm thick fan, as it is thicker than standard 25mm models. Confirm your motherboard or controller provides a 3-pin header for the red, black, and yellow wiring. The fan draws 0.8A at 12V for 9.6W, so ensure the header can supply that current.
Pontos fortes
- IP65 rating blocks dust and water ingress for reliable operation in wet or humid environments
- 3500 RPM delivers 125.2 CFM airflow to meet strong cooling demands
- Hydraulic bearing with self-protection stops the fan safely if obstructed to extend service life
- 3-pin 12 V connector with tach output enables straightforward installation across multiple equipment types
- 38 mm thick 120 mm frame fits standard case mounts while providing high static pressure
Especificações
| Brand | PANO-MOUNTS |
|---|---|
| Series | 12038 Series |
| Model | 12038IP2510 |
| Fan Size | 120mm |
| LED | Non-LED |
| Type | Case Fan |
| Bearing Type | Hydraulic |
| RPM | 3500-3999 RPM |
| Air Flow | >80 CFM |
| Noise Level | > 50 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Compatibility | Case |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Fan Thickness | 38mm |
| Features | IP65 WATERPROOF |
| Dimensions | 120×120×38mm 4.72*4.72*1.5in |
| Package Contents | FAN |
Perguntas sobre este artigo
Does my case need a 120 mm mounting grid and a 12 V three-pin header to run this 38 mm thick fan?
Yes — the unit measures 120×120×38 mm, draws 0.8 A at 12 V through a three-pin connector (red +, black –, yellow tach), so the chassis must provide those mounting holes and a matching header.
Can I keep using an older 25 mm fan on the same 12 V header while adding this 38 mm IP65 model?
Both fans run on 12 V three-pin power, so they can share a header with a splitter; the thicker 38 mm frame simply requires the extra clearance behind the mounting plane.
How do I confirm the self-protection feature is active after installation?
If an object contacts the blades the fan stops without burning out; restarting it after clearing the obstruction shows the protection cycle is working.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 US$
0.00051689BTC
Em stock