Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black fully modular ATX power supply with 120 mm fan and textured cables

Phanteks

Phanteks PH-P1000GH_BK02 1000 W Platinum power supply

SKU CH-4JP6-HJNJX MPN PH-P1000GH_BK02

A fully modular 1000 W ATX 3.1 power supply with PCIe 5.1 support, 80 Plus Platinum efficiency and a zero-RPM fan mode below 40 % load

  • ColorBlack
  • TypeIntel ATX 3.1/PCIe Gen5.1
  • Maximum Power1000 W
  • Fans1 x 120 mm
  • ModularFull Modular
  • Energy-Efficient80 PLUS PLATINUM Certified

Option PH-P1000GH_BK02

  • ATX 3.1 platform with PCIe 5.1 support for modern GPU compatibility
  • 80 PLUS Platinum certification delivers high efficiency and lower heat output
  • 120 mm fan with zero-RPM mode under 40 % load for silent operation
  • Fully modular individual textured cables with combs simplify cable management
  • 12V-2x6 connector supplies up to 600 W through a single cable

1000 W Platinum ATX 3.1 power supply

The Phanteks AMP GH 1000 W unit delivers 80 PLUS Platinum efficiency on an Intel ATX 3.1 platform with PCIe 5.1 support. A fully modular design uses individual textured cables and includes cable combs for clean routing. A 120 mm fluid dynamic bearing fan enables a zero-RPM mode below 40 % load for silent operation.

Suited to high-end GPU builds needing 12V-2x6 power

This PSU targets builders installing modern graphics cards that draw up to 600 W through a single 12V-2x6 connector. The compact 140 mm depth fits standard ATX cases. Buyers who need more than 1000 W of continuous power or require multiple 12V-2x6 cables for dual-GPU configurations should look at higher-capacity or multi-connector units.

1000 W capacity with 600 W GPU headroom

The 1000 W rating comfortably handles a flagship CPU plus a single 600 W-class graphics card with overhead for drives and peripherals. The 12V-2x6 cable covers the highest single-GPU demand defined by the current specification. Systems planning dual flagship GPUs or extreme overclocking beyond the rated output will exceed the available headroom.

Pontos fortes

  • ATX 3.1 platform with PCIe 5.1 support for modern GPU compatibility
  • 80 PLUS Platinum certification delivers high efficiency and lower heat output
  • 120 mm fan with zero-RPM mode under 40 % load for silent operation
  • Fully modular individual textured cables with combs simplify cable management
  • 12V-2x6 connector supplies up to 600 W through a single cable

Especificações

BrandPhanteks
ModelPH-P1000GH_BK02
ColorBlack
TypeIntel ATX 3.1/PCIe Gen5.1
Maximum Power1000 W
Fans1 x 120 mm
ModularFull Modular
Energy-Efficient80 PLUS PLATINUM Certified
OutputOPP (Overpower Protection)
OVP (Over Voltage Protection)
UVP (Under voltage protection
SCP (Short Circuit Protection)
OCP (Over Current Protection)
OTP (Over Temperature Protection)
No-Load Protection
Reset Protection
MTBF>100,000 Hours
Peso de envio3.54 kg
Dimensões da embalagem305 × 229 × 122 mm

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does my case need to fit a 140 mm deep ATX power supply for this unit to install?

Yes, the PSU is built to the compact ATX form factor with a 140 mm depth, so the case must accommodate that length for a proper fit.

Will the 12V-2x6 cable work with a graphics card that still uses the older 12VHPWR connector?

The 12V-2x6 connector is the updated PCIe 5.1 interface and is backward compatible with existing 12VHPWR plugs, so the single cable can deliver up to 600 W to either design.

How can I confirm the fanless mode is active once the system is running?

Under 40 % load the 120 mm fluid-dynamic-bearing fan stops completely, so silent operation at low power draw confirms the zero-RPM mode is working.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.