Sabrent
Sabrent EC-HD2B dual-bay USB 3.0 SATA dock for 2.5 & 3.5in drives
Dual-bay SATA dock connects two 2.5 or 3.5in drives via USB 3.0 with offline cloning up to 60Mbps and plug-and-play setup
- ColorBlack
- Size2.5" & 3.5"
- TypeDock
- Internal InterfaceSATA I/II/III
- External InterfaceUSB 3.0
- Number of Bay2 Bay
- Dual-bay design fits 2.5in and 3.5in SATA drives simultaneously
- USB 3.0 interface delivers up to 5Gbps transfer speed for quick file access
- Offline cloning copies data drive-to-drive at up to 60Mbps without a computer
- Plug-and-play operation requires no driver installation on any supported OS
- Supports high-capacity SATA drives up to 10TB for large storage needs
Dual-bay SATA dock for 2.5 and 3.5in drives
This dock accepts two standard SATA hard drives or SSDs simultaneously. It supports drives up to 10TB and connects via USB 3.0 for plug-and-play operation without driver installation. Offline cloning between bays is available at up to 60Mbps.
USB 3.0 interface caps transfer at 5Gbps
The external USB 3.0 link limits sustained throughput to 5Gbps, falling back to 480Mbps on USB 2.0 and 12Mbps on USB 1.1. Internal SATA I/II/III drives will not exceed this ceiling, so cloning and bulk copies run at the USB bottleneck.
Check drive height and power needs before ordering
Verify that each drive fits the bay dimensions of 6.25in by 2.71in by 3.93in and that the included power adapter can supply both units. The dock weighs 1.56lb and requires a free USB port on the host system.
Pontos fortes
- Dual-bay design fits 2.5in and 3.5in SATA drives simultaneously
- USB 3.0 interface delivers up to 5Gbps transfer speed for quick file access
- Offline cloning copies data drive-to-drive at up to 60Mbps without a computer
- Plug-and-play operation requires no driver installation on any supported OS
- Supports high-capacity SATA drives up to 10TB for large storage needs
Especificações
| Brand | SABRENT |
|---|---|
| Model | EC-HD2B |
| Color | Black |
| Size | 2.5" & 3.5" |
| Type | Dock |
| Internal Interface | SATA I/II/III |
| External Interface | USB 3.0 |
| Number of Bay | 2 Bay |
| Features | Supports Standard Desktop 2.5"/3.5" SATA Hard Drives or SSD Supports hard drives up to 10TB Plug and play, no drivers needed Supports Offline Cloning up to 60Mbps Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1) |
| Dimensions | 6.25" x 2.71" x 3.93" |
| Weight | 1.56 lbs. |
| Peso de envio | 0.74 kg |
| Dimensões da embalagem | 184 × 169 × 71 mm |
Perguntas sobre este artigo
Should I pick the single-bay or dual-bay version of this dock?
This model is the dual-bay version, giving you two slots so you can access two drives at once or run an offline clone from one drive to the other.
What does the 5 Gbps USB 3.0 rating actually deliver when I copy files?
The 5 Gbps figure is the bus ceiling; real-world throughput will be lower and limited by the drive's own SATA speed, so expect typical SATA SSD or HDD rates rather than the full 5 Gbps.
Does the USB 3.0 port cap the speed of my SATA III drive?
Yes, the USB 3.0 link tops out at 5 Gbps while SATA III can reach 6 Gbps, so the dock's USB connection is the bottleneck for the fastest drives.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
