Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

Super Flower

Super Flower Combat FG 1000W 80+ Gold ATX 3.1 Power Supply

SKU CH-T0JT-17589

Fully modular 1000 W ATX 3.1 unit with 80 Plus Gold efficiency, a 120 mm FDB fan, 140 mm depth and native 12V-2x6 PCIe 5.0 cable

  • TypeATX3.1/ ATX3.0 Compatible
  • Maximum Power1000 W
  • Fans1 x 120 mm
  • PFCActive
  • Main Connector20+4 Pin
  • +12V RailsSingle

Options ATX 3.1 80+ Gold (1000W) Black

  • ATX 3.1 80+ Gold (750W) Black
  • ATX 3.1 80+ Gold (850W) Black
  • ATX 3.1 80+ Gold (1000W) Black

As versões riscadas existem, mas não estão disponíveis aqui.

  • Delivers 1000 W for demanding builds
  • 80 PLUS Gold certified at 87% 90% 87% efficiency
  • ATX 3.1 and PCIe 5.0 ready for modern GPUs
  • Fully modular ribbon cables simplify cable management
  • 120 mm fluid dynamic bearing fan with Japanese capacitors

1000 W ATX 3.1 power supply

This Super Flower Combat FG unit delivers 1000 W through a single +12 V rail and meets the ATX 3.1 and PCIe 5.0 specifications. It is 80 PLUS Gold certified with measured efficiencies of 87% at 20% load, 90% at 50% load and 87% at 100% load. The fully modular design uses ribbon cables and includes a native 12V-2x6 connector alongside five 6+2 pin PCIe plugs.

Builders who need ATX 3.1 compliance

The 140 mm depth fits many compact chassis, while the nine SATA connectors support multiple drives. Systems that require more than two CPU power connectors or more than six total PCIe connections will need a different unit. Buyers who want a shorter depth or a higher efficiency rating should look elsewhere.

Sustained load behaviour with a 120 mm FDB fan

Under continuous load the single 120 mm fluid dynamic bearing fan ramps to maintain thermal limits while the 100% Japanese capacitors keep voltage regulation tight. The active PFC and full-range 100–240 V input maintain stable operation across varying mains conditions. Efficiency stays at the certified 87% level at full rated load rather than dropping off after a short burst.

Pontos fortes

  • Delivers 1000 W for demanding builds
  • 80 PLUS Gold certified at 87% 90% 87% efficiency
  • ATX 3.1 and PCIe 5.0 ready for modern GPUs
  • Fully modular ribbon cables simplify cable management
  • 120 mm fluid dynamic bearing fan with Japanese capacitors

Especificações

BrandSuper Flower
TypeATX3.1/ ATX3.0 Compatible
Maximum Power1000 W
Fans1 x 120 mm
PFCActive
Main Connector20+4 Pin
+12V RailsSingle
Max PSU Length140 mm
ModularFull Modular
Energy-Efficient80 PLUS GOLD Certified
Input Voltage100 - 240 V
12V Power Connector2 x 4+4pin CPU
PCI-Express Connector5 x 6+2pin / 1 x Dual 6+2pin to 12V-2x6
SATA Power Connector9
Floppy Connector1
Peripheral Connector4

Perguntas sobre este artigo

What case clearance do I need for the 140 mm PSU length?

The power supply is 140 mm long, so your chassis must provide at least that much depth behind the mounting bracket.

Will the 12V-2x6 cable work with my existing PCIe 5.0 graphics card?

The included dual 6+2-pin to 12V-2x6 cable is built for PCIe 5.0 GPUs and plugs directly into the 16-pin connector.

How do I confirm the fan is running in semi-passive mode after assembly?

With the 120 mm FDB fan, listen for startup spin-up; it should stay silent at low load and ramp up only when temperature rises.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.