Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Silver metal 3.5-inch hot-swap drive caddy tray with open front and side rails

Vszerda

Vszerda 3.5" HDD Caddy Tray HP Gen8/Gen9 SATA/SAS 651314-001

SKU CH-V6WF-CEHM6

3.5-inch hot-swap caddy tray accepts SATA or SAS drives for HP Gen8 and Gen9 ProLiant servers

  • Fits HP Gen8 and Gen9 servers with part number 651314-001
  • Supports both SATA and SAS drives for flexible storage choices
  • Hot-swap design enables drive changes without server downtime
  • Compatible with ProLiant DL, ML, BL and SL series models listed
  • 5 inch form factor matches standard enterprise drive bays

Compatible HP ProLiant Models

This 3.5 inch hard drive caddy tray fits HP ProLiant Gen8 and Gen9 servers including DL360, DL380, DL388, DL320e, DL360e, DL380e, DL385p, DL560, ML310e, ML350e, ML350p, BL420c, BL460c, BL465c, BL660c, WS460c, SL230s and SL250s. It supports both SATA and SAS drives for hot-swap bays. Part number 651314-001 matches the original HP specification for these platforms.

Passive Thermal Design

The caddy contains no fan or active cooling components so it adds no noise or power draw to the server. Drive thermals depend entirely on the chassis airflow and the drive's own specifications. The metal tray conducts heat from the drive body into the server's directed cooling path without additional energy consumption.

Tool-Free Drive Installation

The tray ships ready to accept a single 3.5 inch SATA or SAS drive using the integrated latch mechanism. No screws, rails or adapters are included because the design locks directly into the Gen8 and Gen9 hot-swap backplane. This allows drive swaps without tools or cable management during maintenance windows.

Pontos fortes

  • Fits HP Gen8 and Gen9 servers with part number 651314-001
  • Supports both SATA and SAS drives for flexible storage choices
  • Hot-swap design enables drive changes without server downtime
  • Compatible with ProLiant DL, ML, BL and SL series models listed
  • 5 inch form factor matches standard enterprise drive bays

Especificações

Ainda não há especificações publicadas para este artigo.

Perguntas sobre este artigo

How do I install the 3.5" caddy into an HP Gen8 or Gen9 server, and what step is often missed?

Slide the drive into the tray, secure it with the included screws, then insert the assembly into the hot-swap bay until the latch clicks; the step often missed is fully engaging the latch so the SAS/SATA connector seats properly.

What maintenance or replacement will the 651314-001 tray need over time?

The tray itself has no moving parts; only the drive inside may need replacement, and the plastic latch should be inspected if it becomes loose after repeated hot-swap cycles.

What limit appears first when the caddy is used continuously in a DL380 or DL360?

The mechanical latch and connector interface are rated for repeated hot-swap insertion; sustained use is limited by the drive's own thermal and duty-cycle ratings, not the tray.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.