我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver metal 3.5-inch hot-swap drive caddy tray with open front and side rails

Vszerda

Vszerda 3.5" HDD Caddy Tray HP Gen8/Gen9 SATA/SAS 651314-001

SKU CH-V6WF-CEHM6

3.5-inch hot-swap caddy tray accepts SATA or SAS drives for HP Gen8 and Gen9 ProLiant servers

  • Fits HP Gen8 and Gen9 servers with part number 651314-001
  • Supports both SATA and SAS drives for flexible storage choices
  • Hot-swap design enables drive changes without server downtime
  • Compatible with ProLiant DL, ML, BL and SL series models listed
  • 5 inch form factor matches standard enterprise drive bays

Compatible HP ProLiant Models

This 3.5 inch hard drive caddy tray fits HP ProLiant Gen8 and Gen9 servers including DL360, DL380, DL388, DL320e, DL360e, DL380e, DL385p, DL560, ML310e, ML350e, ML350p, BL420c, BL460c, BL465c, BL660c, WS460c, SL230s and SL250s. It supports both SATA and SAS drives for hot-swap bays. Part number 651314-001 matches the original HP specification for these platforms.

Passive Thermal Design

The caddy contains no fan or active cooling components so it adds no noise or power draw to the server. Drive thermals depend entirely on the chassis airflow and the drive's own specifications. The metal tray conducts heat from the drive body into the server's directed cooling path without additional energy consumption.

Tool-Free Drive Installation

The tray ships ready to accept a single 3.5 inch SATA or SAS drive using the integrated latch mechanism. No screws, rails or adapters are included because the design locks directly into the Gen8 and Gen9 hot-swap backplane. This allows drive swaps without tools or cable management during maintenance windows.

商品特色

  • Fits HP Gen8 and Gen9 servers with part number 651314-001
  • Supports both SATA and SAS drives for flexible storage choices
  • Hot-swap design enables drive changes without server downtime
  • Compatible with ProLiant DL, ML, BL and SL series models listed
  • 5 inch form factor matches standard enterprise drive bays

商品規格

本商品目前尚未公佈規格。

商品問答

How do I install the 3.5" caddy into an HP Gen8 or Gen9 server, and what step is often missed?

Slide the drive into the tray, secure it with the included screws, then insert the assembly into the hot-swap bay until the latch clicks; the step often missed is fully engaging the latch so the SAS/SATA connector seats properly.

What maintenance or replacement will the 651314-001 tray need over time?

The tray itself has no moving parts; only the drive inside may need replacement, and the plastic latch should be inspected if it becomes loose after repeated hot-swap cycles.

What limit appears first when the caddy is used continuously in a DL380 or DL360?

The mechanical latch and connector interface are rated for repeated hot-swap insertion; sustained use is limited by the drive's own thermal and duty-cycle ratings, not the tray.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。