Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Aqua duplex fibre cable with SC connectors on both ends, 3.0 mm jacket, 25 m length

Enfain

Enfain OM3 SC-SC Duplex Multimode Fibre Optic Cable 25m

SKU CH-TCSH-VMQ0Q

OM3 multimode duplex cable with SC connectors supports 10 Gb/s over 25 m at 850 nm wavelength

Length 25m

  • Supports 10/40 Gbit links with OM3 850 nm core
  • Low 0.2 dB typical insertion loss keeps signal strong
  • Return loss above 38 dB reduces back-reflection errors
  • 0 mm PVC jacket and 330 mm bend radius simplify routing
  • Rated for 1 000 mating cycles from –20 °C to 60 °C

25-metre OM3 duplex patch cord

This 25-metre multimode fibre patch cord uses an OM3 10-gigabit core with SC connectors on both ends. It operates at an 850 nm wavelength and is built for switch, server and data-centre links. The aqua-blue 3.0 mm PVC jacket protects the duplex fibres in indoor installations.

Low-loss ceramic ferrules and 1000 mating cycles

Ceramic ferrules keep typical insertion loss at .2 dB and maximum insertion loss at .3 dB while return loss exceeds 38 dB. The cable is rated for 1000 insertion and removal cycles, so repeated re-patching in racks or panels will not degrade performance. A 330 mm minimum bending radius prevents signal loss during tight routing.

Verify SC ports and OM3 compatibility before

Ensure both devices present SC duplex ports and support OM3 multimode fibre at 850 nm. The cord works across 1G, 10G and 40G Ethernet links but will not suit single-mode equipment or connectors such as LC or ST. Confirm the operating temperature range of -20 °C to +60 °C matches your environment.

Prednosti

  • Supports 10/40 Gbit links with OM3 850 nm core
  • Low 0.2 dB typical insertion loss keeps signal strong
  • Return loss above 38 dB reduces back-reflection errors
  • 0 mm PVC jacket and 330 mm bend radius simplify routing
  • Rated for 1 000 mating cycles from –20 °C to 60 °C

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How many times can the SC connectors be mated and unmated before the ceramic ferrules need replacement?

The connectors are rated for 1000 insertion and removal cycles, after which the ceramic ferrules may require replacement.

What is the maximum insertion loss the cable can exhibit when operating at 850 nm?

The maximum insertion loss is 0.3 dB, with a typical value of 0.2 dB at the 850 nm wavelength.

What is the cable's operating temperature range for continuous all-day use?

The cable operates from -20 °C to +60 °C, suitable for continuous use in data centre or server environments.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.