Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
WaveShare 10.1 inch touchscreen portable monitor IPS 1024 by 600 178 degree viewing angle

WaveShare

WaveShare 10.1" Touchscreen Portable Monitor 1024×600 IPS 178°

SKU CH-4BN6-DF56R

A 10.1 inch portable touchscreen monitor with 1024×600 IPS panel, 178° viewing angle and plug-and-play HDMI connectivity

  • CPU TypeOther
  • Sharp 1024×600 IPS panel with 178° viewing
  • Responsive 5-point capacitive touch, 3-5 ms latency
  • Driver-free HDMI plug-and-play across OS
  • Works with Raspberry Pi 4 3 2 1
  • Dual built-in speakers for audio output

10.1" IPS Portable Touchscreen Monitor

The WaveShare 10.1 inch portable monitor combines a 1024×600 IPS panel with a 178° viewing angle and five-point capacitive touch. It targets Raspberry Pi enthusiasts, embedded developers and anyone needing a compact secondary display that works driver-free across Windows, Linux and macOS. The screen accepts HDMI video input and draws power over USB.

Resolution and Interface Limits

Native resolution is 1024×600, though the scaler accepts signals up to 1920×1080; images above the native grid are down-sampled, so fine text may lose sharpness. The HDMI port carries video only, while touch data and backlight power travel over a separate USB link, meaning two cables are always required. The panel tops out at 60 Hz and offers no adaptive-sync or HDR capability.

Plug-and-Play Setup and Common Issues

No driver installation is needed on supported operating systems; the monitor enumerates as a standard HID touch device and an external display. The most frequent issue is forgetting to peel both protective films, which degrades clarity and touch responsiveness. Insufficient USB current from a weak port can cause flicker or touch drop-outs, so a powered hub or adequate supply is advised.

I korthet

  • Sharp 1024×600 IPS panel with 178° viewing
  • Responsive 5-point capacitive touch, 3-5 ms latency
  • Driver-free HDMI plug-and-play across OS
  • Works with Raspberry Pi 4 3 2 1
  • Dual built-in speakers for audio output

Specifikationer

CPU TypeOther

Frågor om den här produkten

Which resolution should I pick between 1024×600 and 1920×1080?

The panel is a native 1024×600 IPS display; it can accept a 1920×1080 signal and downscale it, but the on-screen detail remains limited to 1024×600 pixels.

What does the 178° viewing angle mean when the monitor is on my desk?

Colours and contrast stay consistent whether you look straight on or from far off-centre, so the picture does not wash out when you shift position.

How does the HDMI input limit what I can connect?

The single HDMI port carries both video and touch data, so any device with HDMI output — Raspberry Pi 4, 3, 2, 1, 3B+, 400, laptops, game consoles — can drive the screen without extra cables or drivers.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.