EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
8GB DDR4 2400 CL17 unbuffered DIMM desktop memory module with 1.20V operation
This A-Tech module provides an 8GB DDR4 2400 upgrade for desktop computers. It uses a standard 288-pin DIMM form factor and operates at 1.20V. The memory is designed as a compatible replacement for the G.Skill F4-2400C15D-16GFX kit.
This unbuffered, non-ECC UDIMM suits standard desktop motherboards that accept DDR4 2400 speeds. Systems requiring ECC error correction or registered buffering must select a different module type. Buyers should verify their board supports this specific speed and latency combination.
The module runs at a tested frequency of 2400 with a CAS latency of CL17. This timing value determines whether the stick matches the performance profile required by the target system. Compatibility depends on the motherboard accepting this specific latency at the rated voltage.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F4-2400C15D-16GFX |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F4-2400C15D-16GFX |
| Recommend Use | Compatible Replacement for G.Skill F4-2400C15D-16GFX |
CL17 is the rated CAS latency at 2400 MHz; the module runs at standard 1.20 V DDR4 voltage without a heat spreader, so latency stays consistent under normal desktop workloads.
The unbuffered DIMM has no heat spreader and operates at 1.20 V, so it generates minimal heat and no audible noise even during continuous use.
A standard desktop DDR4 DIMM slot (288-pin) is needed; the module is non-ECC unbuffered and runs at 1.2 V, matching the DDR4 desktop specification.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม