AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
AGI
A 2 TB internal SSD with a built-in heatsink delivers up to 7400 MB/s read and 6700 MB/s write over PCIe 4.0 x4
Options AI828-2TB
The AGI AI828 is a 2TB internal solid state drive built for gaming PCs and workstations that need fast sequential throughput. It uses a PCIe 4.0 x4 interface and 3D NAND flash to deliver read speeds up to 7400 MB/s and write speeds up to 6700 MB/s. The included heatsink helps sustain performance during heavy workloads.
The drive fits a standard M.2 2280 slot and secures with a single screw; the heatsink adds height so confirm motherboard clearance before fitting. Over-tightening the screw can warp the PCB and cause detection failures. Ensure the slot runs PCIe 4.0 x4 — some boards share lanes with other devices and drop to x2 speeds. Update the system BIOS and enable NVMe support in firmware to avoid the drive disappearing after a cold boot.
Verify the motherboard has an M.2 key-M slot wired for PCIe 4.0 x4 and enough vertical space for the heatsink fins. Confirm the operating temperature range of 0 °C to 70 °C matches your case airflow. The drive is rated for 3000 TBW endurance and 2000000 hours MTBF, so plan workloads accordingly. PS5 users should check Sony’s current firmware requirements for heatsink-equipped drives.
| Max Sequential Read | Up to 7400 MBps |
|---|---|
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Interface | PCI-Express 4.0 x4 |
| Memory Components | 3D NAND |
| Protocol | NVMe |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Brand | AGI |
| Series | AI828 |
| Model | AGI2T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Features | ➠ High quality heatsink ➠ Speed up to 7400MB/s ➠ 4TB ultra-large capacity ➠ Support NVMe1.4 |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The drive uses the standard M.2 2280 form factor with an integrated heatsink. Check your motherboard manual for clearance above the slot; most boards accommodate a finned sink of this height.
Yes. The PCIe 4.0 x4 interface and NVMe protocol meet Sony's requirements, and the included heatsink satisfies the console's cooling mandate.
It guarantees the drive can absorb roughly 3000 TB of total writes. At 2 TB capacity, that equals about 1500 full drive writes over the warranty period.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม