저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular M.2 2280 SSD with black finned heatsink covering the circuit board

AGI

AGI AI828 2TB internal SSD with HeatSink

SKU CH-H446-T4E59

A 2 TB internal SSD with a built-in heatsink delivers up to 7400 MB/s read and 6700 MB/s write over PCIe 4.0 x4

  • Max Sequential ReadUp to 7400 MBps
  • Max Sequential WriteUp to 6700 MBps
  • Terabytes Written (TBW)3000TB(4TB)
  • MTBF2,000,000 hours
  • HeatSinkwith HeatSink
  • Form FactorM.2 2280

Options AI828-2TB

  • Reads up to 7400 MB/s for ultra-fast load times
  • Writes up to 6700 MB/s to move large files quickly
  • 3000 TBW endurance rating protects data over years
  • Integrated heatsink keeps temperatures steady during heavy workloads
  • 2 million hour MTBF signals long-term reliability

AGI AI828 2TB NVMe SSD with heatsink

The AGI AI828 is a 2TB internal solid state drive built for gaming PCs and workstations that need fast sequential throughput. It uses a PCIe 4.0 x4 interface and 3D NAND flash to deliver read speeds up to 7400 MB/s and write speeds up to 6700 MB/s. The included heatsink helps sustain performance during heavy workloads.

M.2 2280 installation and common issues

The drive fits a standard M.2 2280 slot and secures with a single screw; the heatsink adds height so confirm motherboard clearance before fitting. Over-tightening the screw can warp the PCB and cause detection failures. Ensure the slot runs PCIe 4.0 x4 — some boards share lanes with other devices and drop to x2 speeds. Update the system BIOS and enable NVMe support in firmware to avoid the drive disappearing after a cold boot.

Compatibility checks before ordering

Verify the motherboard has an M.2 key-M slot wired for PCIe 4.0 x4 and enough vertical space for the heatsink fins. Confirm the operating temperature range of 0 °C to 70 °C matches your case airflow. The drive is rated for 3000 TBW endurance and 2000000 hours MTBF, so plan workloads accordingly. PS5 users should check Sony’s current firmware requirements for heatsink-equipped drives.

주요 특징

  • Reads up to 7400 MB/s for ultra-fast load times
  • Writes up to 6700 MB/s to move large files quickly
  • 3000 TBW endurance rating protects data over years
  • Integrated heatsink keeps temperatures steady during heavy workloads
  • 2 million hour MTBF signals long-term reliability

사양

Max Sequential ReadUp to 7400 MBps
Max Sequential WriteUp to 6700 MBps
Terabytes Written (TBW)3000TB(4TB)
MTBF2,000,000 hours
HeatSinkwith HeatSink
Form FactorM.2 2280
Capacity2TB
InterfacePCI-Express 4.0 x4
Memory Components3D NAND
ProtocolNVMe
Max Shock Resistance1500G
Max Vibration Resistance15G
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Operating Humidity5% to~98%RH (Non-condensing)
BrandAGI
SeriesAI828
ModelAGI2T0G44AI828
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Features➠ High quality heatsink
➠ Speed up to 7400MB/s
➠ 4TB ultra-large capacity
➠ Support NVMe1.4
Height5.30mm
Width22.00mm
Depth80.00mm
Weight7.5g

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the heatsink fit under my motherboard's M.2 shield?

The drive uses the standard M.2 2280 form factor with an integrated heatsink. Check your motherboard manual for clearance above the slot; most boards accommodate a finned sink of this height.

Is this drive compatible with a PlayStation 5?

Yes. The PCIe 4.0 x4 interface and NVMe protocol meet Sony's requirements, and the included heatsink satisfies the console's cooling mandate.

What does the 3000 TBW rating mean for daily use?

It guarantees the drive can absorb roughly 3000 TB of total writes. At 2 TB capacity, that equals about 1500 full drive writes over the warranty period.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.